or
owners manual Volvo XC90
owners manual Volvo XC90 - year of production: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014 - Volvo XC90 I 1 owners manual EN
Document:
pdf (9.36 MB) 268 pages
all ratings: 0
average rating: 5
text version of content this owner's manual page
from owners manual to the vehicle Volvo XC90, year of production 2002 - 2014:
2007 Volvo XC90
manufactured after 1996:
● Refer to the garage door opener owner's manual for verification.
● If your hand-held transmitter appears to program the HomeLink® Universal Transceiver but the
programmed button does not activate the garage door, your garage door opener may have a rolling code.
● Press the programmed HomeLink® button. If the garage door opener has the rolling code feature, the
HomeLink® indicator light flashes rapidly and then glows steadily after approximately 2 seconds.
To train a rolling code garage door opener, follow these instructions after programming the desired
transceiver button according to "Programming the transceiver." The help of a second person may make
training easier.
- Locate the training button on the garage door opener motor head unit. The location and color of the
training button may vary. If you encounter difficulty, refer to the garage door opener owner's manual or
call toll-free 1-800-355-3515 (Internet: www.HomeLink.com).
- Press the "training" button on the garage door opener motor head unit until the "training" light comes
on.
- Press and release the programmed HomeLink® button. Press and release the programmed HomeLink®
button a second time to complete the training process.
- Some garage door openers may require you to do this procedure a third time to complete the training.
- The programmed button on your HomeLink® Universal Transceiver should now operate your garage
door opener. The original hand-held transmitter can also be used, as desired, to operate the garage door.
The remaining two HomeLink® buttons can be programmed in the same way. In the event of any
problems in programming the HomeLink® Universal Transceiver, call toll-free 1-800-355-3515
(Internet: www.HomeLink.com).
pg. 239 Audio
HomeLink® Universal Transceiver
Operating the HomeLink® Universal Transceiver
Once programmed, the HomeLink® Universal Transceiver can be used in place of your hand-held
transmitters.
To operate, the key must be turned to the "accessory" position (II) or the engine must be running. Press
the programmed HomeLink® button to activate the garage door, driveway gate, security lighting, home
security system, etc.
Your original hand-held transmitters may, of course, be used at any time.
Erasing programmed buttons
Individual buttons cannot be erased. To erase all three programmed buttons:
- Turn the ignition key to the "accessory" position (II).
file:///K|/ownersdocs/2007/2007_XC90/07xc90_11.htm (25 of 26)12/30/2006 5:53:54 PM
Download PDF
Click here to download a pdf file with an instruction manual for Volvo XC90
year of production from: 2002
Do you prefer pdf format?
Find out how to download
Enter the code to download PDF file:
All pages in one PDF file!
How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.
:
Volvo XC90 I 1 owners manual
pages 255 - 261
Volvo XC90 I 1 owners manual
page 258 / 268
this site is maintained by advertising - for view instructions, turn off ad blocking in your browser
Download PDF