or
owners manual BMW X1 E84
owners manual BMW X1 E84 - year of production: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016 - BMW X1 E84 owners manual EN
Document:
pdf (6.9 MB) 291 pages
all ratings: 0
average rating: 5
text version of content this owner's manual page
from owners manual to the vehicle BMW X1 E84, year of production 2009 - 2016:
Seite 255
Breakdown assistance Mobility
Jump-starting
Notes
If the battery is discharged, an engine can be
started using the battery of another vehicle and
two jumper cables. Only use jumper cables with
fully insulated clamp handles.
To prevent personal injury or damage to both
vehicles, adhere strictly to the following proceѪ
The so-called starting aid terminal in the engine
dure.
compartment acts as the battery's positive terѪ
Do not touch live parts minal. Pull the cover up and off.
To avoid the risk of potentially fatal injury,
always avoid all contact with electrical compoѪ
nents while the engine is running.◀
Preparation
1. Check whether the battery of the other veѪ
hicle has a voltage of 12 volts and approxiѪ
mately the same capacitance in Ah. This inѪ
formation can be found on the battery.
2. Switch off the engine of the assisting vehiѪ
The body ground or a special nut acts as the
cle.
negative terminal.
3. Switch off any electronic systems/power
consumers in both vehicles.
Connecting jumper cables
Bodywork contact between vehicles
1. Pull off the cap of the BMW starting aid terѪ
There must not be any contact between minal.
the bodies of the two vehicles, otherwise there
2. Attach one terminal clamp of the positive
is a danger of shorting.◀
jumper cable to the positive terminal of the
battery, or to the corresponding starting aid
Starting aid terminals terminal of the vehicle providing assistance.
3. Attach the other end of the cable to the posѪ
Connecting order
itive terminal of the battery, or to the correѪ
Connect the jumper cables in the correct
sponding starting aid terminal of the vehicle
order; otherwise, there is the danger of injury
to be started.
from sparking.◀
4. Attach one terminal clamp of the negative
jumper cable to the negative terminal of the
battery, or to the corresponding engine or
body ground of the vehicle providing assisѪ
tance.
5. Attach the other end of the cable to the negѪ
ative terminal of the battery, or to the correѪ
255
Online Edition for Part no. 01 40 2 914 595 - VI/12
Download PDF
Click here to download a pdf file with an instruction manual for BMW X1 E84
year of production from: 2009
Do you prefer pdf format?
Find out how to download
Enter the code to download PDF file:
All pages in one PDF file!
How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.
:
BMW X1 E84 owners manual
pages 252 - 258
BMW X1 E84 owners manual
page 255 / 291
this site is maintained by advertising - for view instructions, turn off ad blocking in your browser
Download PDF