owners manual KIA Rio

all ratings: 0 average rating: 5

Maintenance 5. Maximum permissible inflationQuality grades can be found where WARNING pressure applicable on the tire sidewall between tread shoulder and maxi- This number is the greatest amount Tires degrade over time, even mum section width. of air pressure that should be put in when they are not being used. the tire. Do not exceed the maximum Regardless of the remaining permissible inflation pressure. Refer For example: tread, it is recommended that TREADWEAR 200 tires generally be replaced afterto the Tire and Loading Information TRACTION AA label for recommended inflation six (6) years of normal service. Heat caused by hot climates orpressure. TEMPERATURE A frequent high loading condi- tions can accelerate the aging Tread wear 6. Maximum load rating The tread wear grade is a compara- process. Failure to follow this This number indicates the maximum warning can result in sudden tive rating based on the wear rate of load in kilograms and pounds that tire failure, which could lead to a the tire when tested under controlled can be carried by the tire. When loss of control and an accident conditions on a specified govern- replacing the tires on the vehicle, involving serious injury orment test course.For example, a tire always use a tire that has the same death. graded 150 would wear one-and-a- load rating as the factory installed tire. half times as well on the government course as a tire graded 100. 4.Tire ply composition and material7. Uniform tire quality grading The relative performance of tires The number of layers or plies of rub- depends upon the actual conditions The following information relates to ber-coated fabric in the tire. Tire of their use. However, performance manufacturers also must indicate thethe tire grading system developed bymay differ from the norm because of the National Highway Traffic Safety materials in the tire, which include variations in driving habits, service Administration (NHTSA) for grading steel, nylon, polyester, and others. practices and differences in road tires by tread wear, traction and tem-characteristics and climate. The letter "R" means radial ply con- struction; the letter "D" means diago-perature performance.These grades are molded on the nal or bias ply construction; and the side-walls of passenger vehicle tires. letter "B" means belted-bias ply con- The tires available as standard or struction. optional equipment on Kia vehicles may vary with respect to grade. 7 34

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders