owners manual Hyundai Tucson

owners manual Hyundai Tucson - year of production: 2004, 2005, 2006, 2007, 2008, 2009, 2010 - Hyundai Tucson I 1 owners manual EN

Document: pdf (10.81 MB) 273 pages

all ratings: 0 average rating: 5

text version of content this owner's manual page from owners manual to the vehicle Hyundai Tucson, year of production 2004 - 2010:

CONSUMER INFORMATION, REPORTING SAFETY DEFECTS & BINDING ARBITRATION OF WARRANTY CLAIMS 8 7 o Four numbers represent the week 6. Maximum load rating I030D01JM-AAT and year the tire was built. ForThis number indicates the maximum TIRE TERMINOLOGY AND DEFINI- TIONS example, the numbers 3105 means load in kilograms and pounds that Air Pressure: The amount of air inside the 31st week of 2005. can be carried by the tire. When the tire pressing outward on the tire. Air 4. Tire ply composition and material replacing the tires on the vehicle, The number of layers or plies ofalways use a tire that has the same pressure is expressed in pounds per square inch (psi) or kilopascal (kPa). rubbercoated fabric in the tire. Tire load rating as the factory installed manufacturers also must indicatetire. Accessory Weight: This means the combined weight of optional accesso- the materials in the tire, which in-7. Uniform Tire Quality Grading clude steel, nylon, polyester, and(UTQG): ries. Some examples of optional ac- others. The letter "R" means radial Tire manufacturers are required tocessories are, automatic transmission, power seats, and air conditioning. ply construction; the letter "D" means grade tires based on three perfor- Aspect Ratio: The relationship of a diagonal or bias ply construction;mance factors: treadwear, traction and the letter "B" means belted-bias and temperature resistance. For more tire's height to its width. ply construction. information, see Uniform Tire Qual- Belt: A rubber coated layer of cords that 5. Maximum permissible inflationity Grading on page 8-14. is located between the plies and the pressure tread. Cords may be made from steel or This number is the greatest amount other reinforcing materials. of air pressure that should be put in Bead: The tire bead contains steel the tire. Do not exceed the maximum wires wrapped by steel cords that hold permissible inflation pressure. Refer the tire onto the rim. to the Tire and Loading Information Bias Ply Tire: A pneumatic tire in which label for recommended inflation pres- the plies are laid at alternate angles sure. less than 90 degrees to the centerline of the tread.

Download PDF

Click here to download a pdf file with an instruction manual for Hyundai Tucson
year of production from: 2004

Do you prefer pdf format?
Find out how to download

Enter the code to download PDF file:

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.