owners manual Nissan Qashqai

all ratings: 0 average rating: 5

3. With the wheel wrench, tighten the wheel bolts COLD pressure is the tyre pressure as measured Removingthewheellockbolt: alternately and evenly in the sequence as illus-after the vehicle has been parked for three hours or1. Insert the wheel lock key j1 to the wheel lock trated (j1-j5 ) until they are tight. more or driven for less than 1.6 km (1 mile). bolt. 4. Lower the vehicle slowly until the tyre touchesCOLDtyrepressuresareshownonthetyreplacard 2. To remove the wheel lock bolt, turn the wheel the ground. affixed to the driver’s side centre pillar. lock key anticlockwise using the wheel wrench. 5. Tighten the wheel bolts securely using the wheelStowing the wheel and tools CAUTION wrench in the sequence as illustrated. Securely store the wheel with the flat tyre, the jack 6. Lower the vehicle completely. • Donotuseapowertooltoremovethewheel and the tools in the specified storage areas. lock bolts. 7. Install the wheel cover (where fitted). Wheel lock bolts (where fitted) • When installing the wheel, tighten the wheel NOTE In order to prevent theft, the specially designed lock bolts to the same tightening torque as Beforeinstallation, align NISSAN logo (centre wheellockboltisinstalledtoeachwheel.Thewheel the normal wheel bolts. For details, see “In- cap) with the wheel bolts/or perpendicular to lock bolt cannot be removed with the commonly stalling the wheel” earlier in this section. valve hole (where fitted), to correctly align toused tools. NOTE the centre. When removing tyres, use the lock key provided • Thewheellockbolthasanindividualcode. Wheel bolt tightening torque: with your vehicle. Awheel lock key with other than the indi- 113 N•m(12kg-m,83ft-lb) vidual code cannot remove the wheel lock As soon as possible, tighten the wheel bolts to bolt. If you lose the wheel lock key, con- the specified torque with a torque wrench. tact a NISSAN dealer for a duplicate with the original wheel lock key code. WARNING • Record the key number as shown on the Retighten the wheel bolts after the vehicle has key code card on the “Security informa- been driven for 1,000 km (600 miles) (also in tion” page at the end of this manual and cases of a flat tyre, etc.). keep it in a safe place, not in the vehicle. The wheel bolts must be kept tightened to specifi- • When you ask for a service at a NISSAN NCE143Z dealer or qualified workshop, make sure cation at all times. It is recommended that the wheel to keep the lock key in the vehicle. Other- bolts be tightened to specification at each mainte- wise, wheels cannot be removed and the nance interval. service cannot be performed. Adjust the tyre pressure to the COLD pressure. 6-6 In case of emergency

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders