owners manual Ford F-150

all ratings: 0 average rating: 5

Capacities and specifications 2 Service refill capacity is determined by filling the transfer case to the bottom of the filler hole with the vehicle on a level surface. 3 Ensure the correct automatic transmission fluid is used. Transmission fluid requirements are indicated on the dipstick or on the dipstick handle. Check the container to verify the fluid being added is of the correct type. Refer to your scheduled maintenance guide to determine the correct service interval. Some transmission fluids may be labeled as dual usage, such as MERCONtand MERCONt V. These dual usage fluids are not to be used in an automatic transmission that requires use of the MERCONt type fluid. However, these dual usage fluids may be used in transmissions that require the MERCONt V type fluid. MERCONtandMERCONtVtypefluidsarenotinterchangeable. DONOTmixMERCONtandMERCONtV.Useofatransmission fluid that indicates dual usage (MERCONt and MERCONt V) in an automatic transmission application requiring MERCONt may cause transmission damage. Use of any fluid other than the recommended fluid may cause transmission damage. 4 Indicates only approximate dry-fill capacity. Some applications may vary based on cooler size and if equipped with an in-tank cooler. The amount of transmission fluid and fluid level should be set by the indication on the dipstick’s normal operating range. 5 Your vehicle’s rear axle is filled with a synthetic rear axle lubricant and is considered lubricated for life. These lubricants do not need to be checked or changed unless a leak is suspected, service is required or the axle assembly has been submerged in water. The axle lubricant should be changed any time the rear axle has been submerged in water. 6 Service refill capacity is determined by filling the axle to 6-14 mm (1/4-9/16 inch) below the bottom of the filler hole with the vehicle on a level surface. Add 118 ml (4 oz.) of Additive Friction Modifier C8AZ-19B546-A or equivalent meeting Ford specification EST-M2C118–A, for complete fill of 8.8 inch and 9.75 inch Traction-Lok axles. 7 Service refill capacity is determined by filling the axle to the bottom of the filler hole with the vehicle on a level surface. For 10.25 inch Traction-Lok axles, use 3.1L (6.5 pints) of Motorcraft SAE 75W-140 Synthetic Rear Axle Lubricant and 236 ml (8 oz.) of Additive 250

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders