owners manual Nissan Juke

all ratings: 0 average rating: 5

Black plate (250,1) SPECIALWINTER EQUIPMENT will lose even more traction.To use the engine block heater It is recommended that the following items be.Allowmorestoppingdistanceunder1.Turn the engine off. carried in the vehicle during winter:these conditions. Braking should be2.Open the hood and unwrap the engine . A scraper and stiff-bristled brush to removestarted sooner than on dry pave-block heater cord. ice and snow from the windows and wiperment. blades. . Allow greater following distances3.Plug the engine block heater cord into a on slippery roads. grounded3-wire, 3-pronged extension cord. . A sturdy, flat board to be placed under the 4.Plug the extension cord into a Ground Fault jack to give it firm support. . Watch for slippery spots (glare ice).Interrupt (GFI) protected, grounded 110- . A shovel to dig the vehicle out of snow-These may appear on an otherwisevolt AC (VAC) outlet. drifts. clear road in shaded areas. If a patch of ice is seen ahead, brake5.The engine block heater must be plugged in . Extra window washer fluid to refill thebefore reaching it. Try not to brakefor at least 2 - 4 hours, depending on reservoir tank. while on the ice, and avoid anyoutside temperatures, to properly warm the sudden steering maneuvers. engine coolant. Use an appropriate timer to DRIVING ON SNOW OR ICE turn the engine block heater on. . Do not use cruise control on slip- WARNING pery roads. 6.Before starting the engine, unplug and . Snow can trap dangerous exhaustproperly store the cord to keep it away from moving parts. . Wetice(328F, 08Candfreezingrain),gases under your vehicle. Keep very cold snow or ice can be slicksnow clear of the exhaust pipe and WARNING and very hard to drive on. The from around your vehicle. vehicle will have much less traction . Donotuseyourengineblockheater or “grip” under these conditions. TryENGINE BLOCK HEATER (if sowith an ungrounded electrical sys- to avoid driving on wet ice until theequipped) temora2-prongedadapter.Youcan road is salted or sanded. Engine block heaters are used to assist in coldbe seriously injured by an electrical . Whatever the condition, drive withtemperature starting. shock if you use an ungrounded caution. Accelerate and slow downThe engine block heater should be used whenconnection. with care. If accelerating or down-the outside temperature is 208F(−78C) or lowerDisconnect and properly store the shifting too fast, the drive wheels engine block heater cord before 5-40 Starting and driving Model "F15-D" EDITED: 2010/ 6/ 24

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders