owners manual Ford Mustang

all ratings: 0 average rating: 5

Child Safety 8. Remove remaining slack from the belt. Using Lower Anchors and Tethers Force the seat down with extra weight, for CHildren (LATCH) for example, by pressing down or WARNINGS kneeling on the child restraint while pulling up on the shoulder belt in order Never attach two child safety seats to force slack from the belt. This is to the same anchor. In a crash, one necessary to remove the remaining anchor may not be strong enough to slack that will exist once the extra hold two child safety seat attachments weight of the child is added to the child and may break, causing serious injury or restraint. It also helps to achieve the death. proper snugness of the child seat to Depending on where you secure a your vehicle. Sometimes, a slight lean child restraint, and depending on the toward the buckle will additionally help child restraint design, you may block to remove remaining slack from the access to certain safety belt buckle belt. assemblies or LATCH lower anchors, 9. Attach the tether strap (if the child seat rendering those features potentially is equipped). unusable. To avoid risk of injury, occupants should only use seating positions where they are able to be properly restrained. The center of the rear seat is not designed as a seating position and is not equipped with safety belts. The LATCH anchors were not designed to be used with a child seat in the center position and there is no tether anchor available at the center. Attempted use of the center as a seating position will increase the risk of injury or death in the event of a crash. E142534 10. Before placing the child in the seat, The LATCH system is composed of three forcibly move the seat forward and vehicle anchor points: two lower anchors back to make sure the seat is securely located where seat back and seat cushion held in place. To check this, grab the meet (called the seat bight) and one top seat at the belt path and attempt to tether anchor located behind that seating move it side to side and forward and position. back. There should be no more than LATCH compatible child safety seats have 1 inch (2.5 centimeters) of movement two rigid or webbing mounted for proper installation. attachments that connect to the two lower Ford recommends checking with a NHTSA anchors at the LATCH equipped seating Certified Child Passenger Safety positions in your vehicle. This type of Technician to make certain the child attachment method eliminates the need restraint is properly installed. In Canada, to use safety belts to attach the child seat, check with your local St. John Ambulance office for referral to a Certified Passenger Seat Technician. 22 Mustang (), enUSA, First Printing

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders