owners manual Tesla S

all ratings: 0 average rating: 5

Child Safety Seats To securely hold child safety seats, all Seating Larger Children passenger seating positions are equipped with If a child is too large to fit into a child safetyan automatic locking retractor (ALR) that, by seat, but too small to safely fit into thepulling the seat belt beyond the length standard seat belts, use a booster seatneeded for a typical adult occupant, locks the appropriate for the childs age and size.belt into place until the seat belt is unbuckled Carefully follow the manufacturersand the webbing is fully retracted. The ALR instructions to secure the booster seat usingmechanism operates as a ratchet, winding in the seat belts. Do not use the LATCH systemslack and preventing the seat belt from to secure booster seats, even in situationsextending any further until it has been where the booster seat is equipped with thecompletely rewound. When installing a child LATCH system. safety seat, engage the belt's automatic locking retractor by pulling the seat belt Installing Child Safety Seats webbing until it is fully extended. The ALR system engages only when the seat belt is at There are two general methods used to installits maximum extension point. child safety seats: Note: An automatic locking retractor • Seat belt retained - these seats aredisengages only when the seat belt is secured using the vehicles seat belts (see unbuckled and fully retracted. The belt can Installing Seat Belt Retained Child Seatsthen be worn as a normal belt, sliding freely in on page 25). and out and locking tight only in an • LATCH retained - these seats can attachemergency. Once disengaged, the belt must to anchor bars built into the vehicles rearbe fully extended to re-engage the locking seats (see Installing LATCH Child Seats onmechanism whenever you install a child safety page 26). seat. Check the child safety seat manufacturersAlways follow the detailed instructions instructions and the table on Child Safetyprovided by the child safety seat Seats on page 23 to determine whichmanufacturer. General guidelines are provided installation method to use. Some child safetybelow. seats can be installed using either method.1.Place the child safety seat in Model S, and Always follow the child safety seatfully extend the seat belt. Route and manufacturers instructions. buckle the seat belt in accordance with the child safety seat manufacturers Installing Seat Belt Retained Childinstructions. Seats First, make sure that the child falls into the correct weight range for the seat. Avoid dressing the child in bulky clothing and do not place any objects between the child and the restraint system. Adjust harnesses for every child, every trip. 2.Allow the seat belt to retract, and remove all slack in the seat belt while firmly pushing the child safety seat into the Model S seat. 3.If the seat belt retained child safety seat has an upper tether, attach it to the back of the seat (see Attaching Upper Tether Straps on page 26). Seating and Safety Restraints 25

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders