owners manual Suzuki SX4

owners manual Suzuki SX4 - year of production: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014 - Suzuki SX4 owners manual EN

Document: pdf (4.86 MB) 279 pages

all ratings: 0 average rating: 5

text version of content this owner's manual page from owners manual to the vehicle Suzuki SX4, year of production 2006 - 2014:

Seat Adjustment: 3 BEFORE DRIVING To program a new transmitter CAUTION 1) Confirm that all the doors are closed The transmitter/remote controller is a and the ignition key is out of the ignition switch. (2) sensitive electronic instrument. To avoid damaging it, do not expose it to 2) Open the driver’s door. dust or moisture or tamper with inter- 3) Insert the key, turn the ignition switch to nal parts. the “ON” position, turn the ignition switch to the “LOCK” position and remove the key within 10 seconds. Programming/removing a transmitter code yourself Your new vehicle was originally equipped with two transmitters. If you have lost one of the transmitters, you should change the transmitter code in your 52D212 vehicle’s memory as soon as possible for 6) Press the “UNLOCK” button (2) on the security. If you purchase additional trans- transmitter one time within 20 seconds mitters, the new transmitters need to be (after step 5). All the doors will lock/ programmed into your vehicle’s memory. unlock to confirm that the procedure You can perform this yourself by using the(1) has been completed and the transmitter following procedure: has been programmed. 7) If you want to program an additional NOTE: transmitter, repeat the procedure from • You can program up to three transmitter 66J018 step 1) through step 6). codes into your vehicle’s memory. The 8) Make sure that the keyless entry sys- 4) Push and release the driver’s door three codes may be the same or differ-switch (1) 3 times, insert the keytem , andoperates properly by operating ent. turn the ignition switch to the “ON” posi-each transmitter. • If you try to program a fourth code, thetion within 20 seconds. oldest code will be cleared automatically.5) Turn the ignition switch to the “LOCK” • To purchase new transmitters, see yourposition and remove the key within 10 SUZUKI dealer. seconds. All doors will lock/unlock to • Before you begin programming, have all confirm that this procedure has been of your transmitters available. properly completed. 2-12 80J22-03E

Download PDF

Click here to download a pdf file with an instruction manual for Suzuki SX4
year of production from: 2006

Do you prefer pdf format?
Find out how to download

Enter the code to download PDF file:

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.