owners manual Seat Exeo

all ratings: 0 average rating: 5

exeo_EN.book Seite 245 Montag, 30. August 2010 4:45 16 Wheels and tyres245 For the sake of the environment WARNING Old tyres must be disposed of according to the laws in the country concerned.If the wheel bolts are not tightened correctly, the wheel could become loose while driving. Risk of accident. Note • The wheel bolts must be clean and turn easily. Never apply grease or oil • For technical reasons, it is not generally possible to use the wheels from to them. other vehicles. This can also apply to wheels of the same model. The use of • Use only wheel bolts which belong to the wheel. wheels or tyres which have not been approved by SEAT for use with your • If the torque of the wheel bolts is too low, they could loosen whilst the model may invalidate the vehicle’s type approval for use on public roads.vehicle is in motion. Risk of accident! If the tightening torque is too high, • If the spare tyre is not the same as the tyres that are mounted on the the wheel bolts and threads can be damaged. vehicle - for example with winter tyres - you should only use the spare tyre for a short period of time and drive with extra care. Refit the normal road wheel Caution as soon as possible. The prescribed tightening torque for wheel bolts for steel and alloy wheels is 120 Nm. Wheel bolts Wheel bolts must be tightened to the correct torque.Winter tyres The design of wheel bolts is matched to the rims. If different wheel rims are Winter tyres will improve the vehicles handling on snow and fitted, the correct wheel bolts with the right length and correctly shaped bolt ice. heads must be used. This ensures that wheels are fitted securely and that the brake system functions correctly. In winter conditions winter tyres will considerably improve the vehicle’s In certain circumstances, you should not use wheel bolts from a different handling. The design of summer tyres (width, rubber compound, tread vehicle, even if it is the same model ⇒ page 218. pattern) gives less grip on ice and snow. After the wheels have been changed, the tightening torque of the wheel bolts Winter tyres must be inflated to a pressure 0.2 bar higher than the pressures should be checked as soon as possible with a torque wrench. ⇒ The tight-specified for summer tyres (see sticker on tank flap). ening torque for steel and alloy wheels is 120 Nm.Winter tyres must be fitted on all four wheels. Information on permitted winter tyre sizes can be found in the vehicle’s regis- tration documents. Use only radial winter tyres. All tyre sizes listed in the vehicle documentation also apply to winter tyres. Safety First Operating Instructions Practical Tips Technical Specifications

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders