owners manual Lexus CT200h

all ratings: 0 average rating: 5

CT200h_OM_OM76135E_(EE).book Page 246 Friday, May 30, 2014 11:14 AM 246 4-5. Using the driving support systems ■Conditions that may trigger the system even if there is no possibility of a collision ●When there is an object by the roadside at the entrance to a curve ●When passing an oncoming vehicle on a curve ●When driving over a narrow iron bridge ●When there is a metal object on the road surface ●When driving on an uneven road surface (nose up, nose down) ●When passing an oncoming vehicle on a left-turn (left-hand drive vehicles) or right-turn (right-hand drive vehicles) ●When your vehicle rapidly closes on the vehicle in front ●When a grade separation/interchange, sign, billboard, or other structure appears to be directly in the vehicle’s line of travel ●When the steep angle of the road causes a metal object located beneath the road sur- face to be seen ahead of the vehicle ●When an extreme change in vehicle height occurs ●When the axis of the radar is out of adjustment ●When passing through certain toll gates ●When passing through an overpass ●When passing through a tunnel When the system is activated in the situation dsescribed above, there is also a possibility that the seat belts will retrtac quickly and the brakes will be applied with a force greater than normal. When the seat belt is locked in the retracted position, stop the vehicle in a safe place, release the seat belt and refasten it. ■Obstacles not detected The sensor cannot detect plastic obstacles such as traffic cones. There may also be occa- sions when the sensor cannot detect panedestris, animals, bicycles, motorcycles, trees, or snowdrifts. ■Situations in which the pre-crash safety system does not function properly The system may not function effectively in situations such as the following: ●On roads with sharp bends or uneven surfaces ●If a vehicle suddenly moves in front of vehicle, such as at an intersection ●If a vehicle suddenly cuts in front of vehicle, such as when overtaking ●In inclement weather such as heavy rain, fog, snow or sand storms ●When your vehicle is skidding with the VSC system off ●When an extreme change in vehicle height occurs ●When the axis of the radar is out of adjustment ■Automatic cancelation of the pre-crash safety system When a malfunction occurs due to sensor contamination, etc. that results in the sensors being unable to detect obstacles, the pre-crash safety system will be automatically dis- abled. In this case, the system will not activate even if there is a collision possibility. ■When there is a malfunction in the system, or if the system is temporarily unusable Warning lights and/or warning messages will turn on or flash. (→P. 515, 521) CT200h_OM_OM76135E_(EE)

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders