owners manual Subaru Forester

all ratings: 0 average rating: 5

7-26 Starting and operating that full vehicle control will bespare tire, the effectiveness ofNOTE maintained at all times and underthe Vehicle Dynamics Control. Slight twitching of the brake pedal all conditions, its activationsystem is reduced and thismaybefelt whentheVehicle Dynamics should be seen as a sign thatshould be taken into accountControl system operates; a small de- the speed of the vehicle shouldwhen driving the vehicle ingree of vehicle or steering wheel shak- be reduced considerably. such a condition. ing may also be noticed in this situa- . Whenever suspension compo- tion. These are normal characteristics nents, steering components, orIn the event of wheelspin and/or skiddingof Vehicle Dynamics Control operation an axle are removed from aon a slippery road surface and/or duringand are no cause for alarm. vehicle equipped with the Vehiclecornering and/or an evasive maneuver,. When driving off immediately after Dynamics Control system, havethe Vehicle Dynamics Control system startingtheengine,ashort-livedopera- an inspection of that systemadjusts the engine’s output and thetion noise may be noticed coming from wheels’ respective braking forces to helpthe engine compartment. This noise is performedbyanauthorized SUBARUdealer. maintain traction and directional control.generated as a result of a check being . Thefollowingprecautionsshould. Traction Control Functionperformed on the Vehicle Dynamics be observed in order to ensureThetraction control function is designed toControl system and is normal. that the Vehicle Dynamics Con-prevent spinning of the driving wheels on. Depending on the timing of activa- trol system is operating properly:slippery road surfaces, thereby helping totion of the brakes, the brake pedal may maintain traction and directional control.seem to jolt when you drive off after – All four wheels should beActivation of this function is shown bystarting the engine. This is a conse- fitted with tires of the samesteady illumination of the Vehicle Dy-quence of the Vehicle Dynamics Con- size, type, and brand. Further-namics Control operation indicator light.trol operational check and is normal. more, the amount of wear . In the circumstances listed in the should be the same for all. Skid Suppression Functionfollowing, the vehicle may be more four tires. Theskid suppression function is designedunstable than it feels to the driver. – Keep the tire pressure at theto help maintain directional stability byThe Vehicle Dynamics Control System proper level as shown on thesuppressing the wheels’ tendency to slidemay therefore operate. Such operation vehicle placard attached tosideways during steering operations. Acti-does not indicate a system fault. the driver’s side door pillar.vation of this function is shown by flashing– on gravel-covered or rutted – Use only the specified tem-of the Vehicle Dynamics Control operationroads porary spare tire to replace aindicator light. – on unfinished roads flat tire. With a temporary – when the vehicle is fitted with

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders