owners manual Nissan Cube

owners manual Nissan Cube - year of production: 2008 - Nissan Cube III 3 owners manual EN

Document: pdf (3.02 MB) 329 pages

all ratings: 0 average rating: 5

text version of content this owner's manual page from owners manual to the vehicle Nissan Cube, year of production 2008:

Black plate (246,1) PUSHSTARTING 6. Connect jumper cables in the sequence asthe engine of the vehicleAbeing jumpDo not attempt to start the engine by pushing. * illustrated ( 1? 2 ? 3 ? 4 ). started. * * * * For the vehicle equipped with Intelli- CAUTION gent Key system: CAUTION . Continuously Variable Transmission If the battery is discharged, the ignitionDonotkeepthestarter motor engaged (CVT) models cannot be push- switch cannot be moved from the OFF for more than 10 seconds. If the engine started or tow-started. Attempting position and, if the steering lock isdoes not start right away, place the to do so may cause transmission engaged, the steering wheel cannot beignition switch in the OFF position and damage. moved. Connect the jumper cables to wait 10 seconds before trying again. the booster vehicle B before turning . Three-way catalyst equipped mod- * els should not be started by pushing theignition switch and disengaging the9.After starting your engine, carefully discon- steering lock. nect the negative cable and then the positivesince the three way catalyst may be cable ( 4? 3 ? 2 ? 1 ). damaged. * * * * CAUTION 10. Replace the vent caps (if so equipped). Be.Never try to start the vehicle by sure to dispose of the cloth used to covertowing it; when the engine starts, . Always connect positive (+) to posi- the vent holes as it may be contaminatedthe forward surge could cause the tive (+) and negative (−) to body with corrosive acid. vehicle to collide with the tow ground (for example, as illustrated), vehicle. not to the battery. . Makesurethejumpercablesdonot touch moving parts in the engine compartment and that the cable clamps do not contact any other metal. 7. Start the engine of the booster vehicle B * and let it run for a few minutes. 8. Keep the engine speed of the booster vehicleB at about 2,000 rpm, and start * 6-10 In case of emergency Model "Z12-D" EDITED: 2009/ 9/ 17

Download PDF

Click here to download a pdf file with an instruction manual for Nissan Cube
year of production from: 2008

Do you prefer pdf format?
Find out how to download

Enter the code to download PDF file:

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.