owners manual Lexus CT200h

all ratings: 0 average rating: 5

CT200h_OM_OM76135E_(EE).book Page 240 Friday, May 30, 2014 11:14 AM 240 4-5. Using the driving support systems ■When the “TRC OFF” indicator comes on even if the TRC OFF switch has not been pressed TRC cannot be operated. Contact any authorized Lexus dealer or repairer, or another duly qualified and equipped professional. ■Sounds and vibrations caused by the ABS, brake assist, VSC and TRC ●A sound may be heard from the engine compartment when the hybrid system is started, just after the vehicle begins to move, if the brake pedal is depressed forcefully or repeatedly, or 1-2 minutes after the hybrid system is stopped. This sound does not indicate that a malfunction has occurred in any of these systems. ●Any of the following conditions may occr when the abouve systems are operating. None of these indicates that a malfunction has occurred. • Vibrations may be felt through the vehicle body and steering. • A motor sound may be heard after the vehicle comes to a stop. • The brake pedal may pulsate slightly after the ABS is activated. • The brake pedal may move down slightly after the ABS is activated. ■EPS operation sound When the steering wheel is operated, a motor sound (whirring sound) may be heard. This does not indicate a malfunction. ■Reduced effectiveness of the EPS system The effectiveness of the EPS system is reduced to prevent the system from overheating when there is frequent steering input over an extended period of time. The steering wheel may feel heavy as a result. Should th occis ur, refrain from excessive steering input or stop the vehicle and turn the hybrid system off. The EPS system should return to nor- mal within 10 minutes. ■Automatic reactivation of TRC system After turning the TRC system off, the system will be automatically re-enabled in the fol- lowing situations: ●When the power switch is turned off ●The TRC will turn on when vehicle speed increases ■Operating conditions of emergency brake signal When the following three conditions are met, the emergency brake signal will operate: ●The emergency flashers are off. ●Actual vehicle speed is over 55 km/h (35 mph). ●The brake pedal is depressed in a manner that cause the system to judge from the vehi- cle deceleration that this is a sudden braking operation. ■Automatic system cancelation of emergency brake signal The emergency brake signal will turn off in any of the following situations: ●The emergency flashers are turned on. ●The brake pedal is released. ●The system judges from the vehicle deceleration that is not a sudden braking operation. CT200h_OM_OM76135E_(EE)

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders