Suzuki SX4 S Cross owners manual page 24

text version of content this owner's manual page from owners manual to the vehicle Suzuki SX4 S-Cross, year of production 2013:

BEFORE DRIVING Keys Immobilizer System NOTE: If the immobilizerlkeyless push start sys- tem warning light blinks This system is designed to help prevent or comes on, a vehicle theft by electronically disabling the message may be shown on the information EXAMPLE engine starting system. display. The engine can be started only with your For vehicles without keyless push start vehicle's original immobilizer ignition key system or keyless push start system remote con-If this light blinks, turn the ignition switch to troller which has an electronic identification the "LOCK" position, then turn it back to code programmed into it. The key or the "ON" position. remote controller communicates the identi- If the light still blinks after the ignition fication code to the vehicle when the igni-switch is turned back to the "ON" position, tion switch is turned to the "ON" position or there may be something wrong with your the engine switch is pressed to change the key or with the immobilizer system. Ask ignition mode to "ON". If you need to make your SUZUKI dealer to have the system spare keys or remote controllers, see your inspected. SUZUKI dealer. The vehicle must be pro- 54G489 grammed with the correct identification Your vehicle comes with a pair of identical code for the spare. A key made by an ordi-For vehicles with keyless push start keys. Keep the spare key in a safe place. nary locksmith will not work. system One key can open all of the locks on the If this light blinks, change the ignition mode vehicle. to "LOCK" (OFF), then change back to The key identification number "ON". Also refer to "If the master warning is stamped indicator light blinks and the engine cannot on a metal tag provided with the keys or on be started" in "Starting the Engine (Vehicle the keys. Keep the tag (if equipped) in a with Keyless Push Start System)" in the safe place. If you lose your keys, you will "OPERATING YOUR VEHICLE" section. need this number to have new keys made. 80JM122 If the light still blinks after the ignition mode Write the number below for your future ref-If the immobilizer/keyless push start sys-is changed back to "ON", there may be erence. tem warning light blinks when the ignition something wrong with your key or with the I KEY NUMBER: switch is in the "ON" position or the ignition immobilizer system. Ask your SUZUKI dealer mode is "ON", the engine will not start. to have the system inspected. 2-1

owners manual Suzuki SX4 S-Cross

owners manual Suzuki SX4 S-Cross - year of production: 2013 - Suzuki SX4 S Cross owners manual EN