owners manual Lexus LS

all ratings: 0 average rating: 5

238 4-3. Operating the lights and wipers ●In the situations below, the system may not be able to correctly detect the sur- rounding brightness levels, and may flash or expose oncoming or preceding vehi- cles to the high beam or may continue using the low beam. Therefore, in these situations you should consider turning the high beams on or off manually rather than relying on the Automatic High Beam system. • In bad weather (rain, snow, fog, sandstorms etc.) • The windshield is obscured by fog, mist, ice, dirt etc. • The windshield is cracked or damaged. • The inside rear view mirror or camera sensor is deformed or dirty. • The camera sensor temperature is extremely high. • Surrounding brightness levels are equal to those of headlights, tail lights or fog lights. • Vehicles ahead have headlights that are either switched off, dirty, are changing color, or have are not aimed properly. • When driving through an area of intermittently changing brightness and dark- ness. • When frequently and repeatedly driving ascending/descending roads, or roads with rough, bumpy or uneven surfaces (such as stone-paved roads, gravel tracks etc.). • When frequently and repeatedly taking curves or driving on a winding road. • There is a highly reflective object ahead of the vehicle, such as a sign or a mirror. • The back of a vehicle ahead is highly reflective, such as a container on a truck. • The vehicle’s headlights are damaged or dirty. • The vehicle is listing or tilting, due to a flat tire, a trailer being towed etc. ■Temporary lowering sensor sensitivity The sensitivity of the sensor can be temporarily lowered. To lower the sensitivity, push and hold the “AUTO” button on the inside rear view mir- ror for 15 to 20 seconds, and release. The indicator light on the inside rear view mir- ror will flash to indicate that the sensitivity has been lowered. When the engine switch is turned off, the sensitivity will be returned to its normal level. CAUTION ■Limitations of the Automatic High Beam Do not rely on the Automatic High Beam. Always drive safely, taking care to observe your surroundings and turn the high beam on or off manually if necessary. LS460/LS460L_U (OM50E76U)

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders