owners manual Seat Alhambra

all ratings: 0 average rating: 5

alhambra_aleman.book Seite 234 Montag, 23. M‰rz 2009 1:12 13 234 If and when 6 ABox spanner for wheel bolts Taking out the spare wheel 7 AJack. Before you return the jack to the tool box, you must fully wind in the claw. The crank must then be folded tight against the side of the jack. 44), the key for unlocking the sunroof in an The removable towing bracket 44) 44) emergency and the anti-theft wheel bolt adaptor are stored next to the vehicle tools. Adapter for anti-theft wheel bolts 44) We recommend you carry the wheel bolt adapter in the vehicle tool kit at all times. The code number of the anti-theft wheel bolt is stamped on the front of the adapter. You will need this number to replace the adapter if lost. Make a note the code number of the anti-theft wheel bolt and keep it in a safe place - but not in your vehicle. Fig. 152 Taking out the spare wheel WARNING 1. Lift the cover A ⇒ fig. 152 located on the floor of the luggage • Do not use the hexagonal socket in the screwdriver handle to tighten A the wheel bolts. It is not suitable for tightening the bolts to the necessary compartment, next to the tailgate lock. torque. This may cause an accident. B • The jack supplied by the factory is only designed for changing wheels 2. Pull the ring of the rubber seal A upwards. C on this model. Never attempt to use it for lifting heavier vehicles or other 3. Remove the box spanner A from the vehicle tools. loads. Risk of injury. 4. Fit the box spanner on the bolt, to the maximum, and hold in this • Use the jack only on firm, level ground. D • Never start the engine when you have raised the vehicle on the jack. position. At the same time press the safety ring A downwards ⇒ . Risk of accident. 5. Turn the box spanner C several times to the left, until the spare • Never place your body (e.g. arm or leg) underneath the vehicle if it is A only supported by the jack Risk of injury. wheel can be fitted, hanging from a wire, vertically behind the • If you have to work underneath the vehicle, you must use suitable vehicle. stands additionally to support the vehicle - Risk of accident!.6. Separate the plastic pieces so that they may be inserted into the central aperture of the rim and so free the wheel.

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders