or
owners manual Peugeot 508
owners manual Peugeot 508 - year of production: 2010 - Peugeot 508 owners manual EN
Document:
pdf (14.17 MB) 352 pages
all ratings: 0
average rating: 5
text version of content this owner's manual page
from owners manual to the vehicle Peugeot 508, year of production 2010:
Checks
®
T opping up the AdBlue additive
A s soon as the "UREA" warning lamp comes on, you must fill or top up the additive tank as soon as possible.
®®®
For filling of the AdBlue tank, it
is recommended that you contact
a franchised dealer or a qualified
workshop.
This refilling operation forms part of the
routine servicing of your vehicle (refer
to the servicing booklet).
®®®
If the AdBlue additive is completely
used up ("starting prevented" or "No
start on 0 km" message), you will not be
able to restart the vehicle.
To allow starting, you can top-up ®®®
Remove the ignition key, or if your vehicle Wipe any splashes of the AdBlue aaddddiittiivvee
yourself, adding at least 3.8 litres of the has one, press the START/STOP button to Once you have finished topping-up, refit
®®®
AdBlue aaddddiittiivvee ((eeqquuiivvaalleenntt ttoo aarroouunndd switch off the engine. the blue and then the black cap.
3 000 miles (5 000 km) of range for the Lift the boot carpet then the cover or spare Wait for around 5 minutes without doing
®®®
AdBlue additive) before making an wheel for access to the tank filler cap. anything on the vehicle (opening a door,
appointment with a dealer as soon as Unscrew and remove the black cap. radio, …) before switching on the ignition.
®®®
possible to have the AdBlue tank filled. Unscrew and remove the 2nd cap (blue).
If you have to top-up yourself, ensure
that the vehicle is on a flat and level
surface (not over a kerb or on a ®®®
slope, .) so as to ensure correct filling. If necessary, use the I f the AdBlue aaddddiittiivvee isis ssppiilltt ououttssiiddee
Do not fill the tank when the ambient screwdriver end of the of the tank, wash the spillage using
temperature is below -10°C. towing eye, located in the cold water to avoid crystallisation of the
boot. product and damage to surrounding
materials.
®®® ®®®
Remove the cap from the AdBlue aaddddiittiivvee If the AdBlue adadddiittiivvee hhaass aallrreeaaddyy
container formed crystals, wipe them of with a
To top-up, follow the instructions on the sponge and hot water.
container.
234
Download PDF
Click here to download a pdf file with an instruction manual for Peugeot 508
year of production from: 2010
Do you prefer pdf format?
Find out how to download
Enter the code to download PDF file:
All pages in one PDF file!
How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.
:
Peugeot 508 owners manual
pages 233 - 239
Peugeot 508 owners manual
page 236 / 352
this site is maintained by advertising - for view instructions, turn off ad blocking in your browser
Download PDF