owners manual Subaru Forester

all ratings: 0 average rating: 5

7-18 Starting and operating “LOCK” position and remove the key fromIf you must perform the above procedure,cover. the ignition key cylinder.the shift lock system (or the vehicle controlNOTE . If the ignition switch is turned to thesystem) may be malfunctioning. Contact a “LOCK”position while the select lever is inSUBARUdealerforaninspection assoonTo prevent damage to the shift lock the “N” position, the select lever may notas possible.cover, wrap the tip of the flat-head bemovedtothe“P”position after a periodIfthe select lever does not move afterscrewdriver with vinyl tape or a cloth of time. Therefore, move the select lever before removing the cover. to the “P” position with the brake pedalperforming the above procedure, refer to depressed soon after the ignition switch is“Shift lock release using the shift lock turned to the “LOCK” position.release button” F7-18. ! Shift lock release using the shift ! Shift lock release lock release button If the select lever cannot be operated, turnPerformthefollowingproceduretorelease the ignition switch back to the“ON”the shift lock. position then move the select lever to the1. Apply the parking brake and stop the “P” position with the brake pedal de-engine. pressed. Ifthe select lever does not move after performing the above procedure, perform the following steps. 3. While depressing the brake pedal, . When the select lever cannot be insert a screwdriver into the hole, press shifted from “P” to “N”: the shift lock release button using a Refer to “Shift lock release using the shift screwdriver, and then move the select lock release button” F7-18. lever. . When the select lever cannot be shifted from “N” to “R” or “P”: Ifthe select lever does not move after Within 60 seconds after placing the igni- performing the above procedure, the shift tion switch in the “Acc” position, move the lock system may be malfunctioning. Con- select lever to the “R” or “P” position with2. Remove the shift lock cover using atact a SUBARU dealer for an inspection the brake pedal depressed.flat-head screwdriver. The shift lock re-as soon as possible. lease button is located under the shift lock

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders