owners manual Lexus IS

all ratings: 0 average rating: 5

234 4-3. Operating the lights and wipers ■The Automatic High Beam can be operated when The power switch is in ON mode. ■Camera sensor detection information ●High beam may not be automatically turned off in the following situations: • When oncoming vehicles suddenly appear from a curve • When the vehicle is cut in front of by another vehicle • When oncoming or preceding vehicles are hidden from sight due to repeated curves, road dividers or roadside trees ●High beam may be turned off if an oncoming vehicle that is using fog lights without using the headlights is detected. ●House lights, street lights, red trafficals, signand illuminated billboards or signs may cause the high beam to turn off. ●The following factors may affect the amount of time taken to turn high beam on or off: • The brightness of headlights, fog lights, and tail lights of oncoming and preceding vehicles • The movement and direction of oncoming and preceding vehicles • When an oncoming or preceding vehicle only has operational lights on one side • When an oncoming or preceding vehicle is a two-wheeled vehicle • The condition of the road (gradient, curve, condition of the road surface etc.) • The number of passengers and amount of luggage ●High beam may be turned on or off when unexpected by the driver. ●Small vehicles, such as bicycles, may not be detected. ●In the situations below, the system may not be able to correctly detect the surrounding brightness levels, and may flash or expose nearby pedestrians to the high beam. There- fore, you should consider turning the high beams on or off manually rather than relying on the Automatic High Beam system. • In bad weather (rain, snow, fog, sandstorms etc.) • The windshield is obscured by fog, mist, ice, dirt etc. • The windshield is cracked or damaged. • The camera sensor is deformed or dirty. • Surrounding brightness levels are equal to those of headlights, tail lights or fog lights. • Vehicles ahead have headlights or tail lights that are either switched off, dirty, chang- ing color, or have improperly adjusted aim. • When driving through an area of intermittently changing brightness and darkness. • When frequently and repeatedly driving ascending/descending roads, or roads with rough, bumpy or uneven surfaces (such as stone-paved roads, gravel tracks etc.). • When frequently and repeatedly taking curves or driving on a winding road. • There is a highly reflective object ahead of the vehicle, such as a sign or a mirror. • The vehicle’s headlights are damaged or dirty. • The vehicle is listing or titling, due to a flat tire, a trailer being towed etc. • The driver believes that the high beam may be causing problems or distress to other drivers or pedestrians nearby. • The vehicle is used in a territory in which vehicles travel on the opposite side of the road of the country for which the vehicle is approved, for example using a vehicle designed for right-hand traffic in a left-hand traffic territory, or vice versa. IS300h_EE(OM53D56E)

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders