owners manual Hyundai Santa Fe

all ratings: 0 average rating: 5

DO-IT-YOURSELF MAINTENANCE 6 24 G290B01O-AAT 6. Draw a vertical line (through the center of SPECIFICATION: each headlight beam pattern) and a horizon- Adjustment After Headlight Assembly tal line (through the center of each headlightReplacement "H"; beam pattern) on the aiming screen. Horizontal center line of headlights from And then, draw a parallel line at 0.8 in. (21 ground: 2WD : 32.5 in.(822 mm) Vertical line mm) under the horizontal line. 4WD : 33.3 in.(843 mm) 7. Adjust each cut-off line of the low beam to the Horizontal line W "W"; "P" parallel line with a phillips screwdriver - Distance between each headlight center: VERTICAL AIMING. 46.5 in.(1,178 mm) H "L"; Cut-off line ! Distance between the headlights and the WARNING: wall that the lights are tested against: Horizontal aiming should be adjusted by H L Ground line 118 in. (3,000 mm). an authorized Hyundai dealer. G290A03O If the vehicle has had front body repair and the headlight assembly has been replaced, the headlight aiming should be checked using an aiming chart as shown in the illustration. Turn on the headlight switch. (Low Beam Position) 1. Adjust headlights so that main axis of light is parallel to center line of the body and is aligned with point "P" shown in the illustration. 2. Dotted lines in the illustration show the center of headlights. smhma-6.p65 24 7/28/04, 5:56 PM

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders