owners manual Seat Toledo

all ratings: 0 average rating: 5

toledo ingles.book Seite 230 Mittwoch, 11. April 2007 1:25 13 230 Wheels and tyres This contains the following information: WARNING (continued) 195Tyre width in mm • If wheel trims are retrofitted, you must ensure that the flow of air to the 65 Height/width ratio in % R Tyre construction: Radial brakes is not restricted. This could cause them to overheat. 15 Rim diameter in inches • All four wheels must be fitted with radial tyres of the same type, size 91 Load rating code (rolling circumference) and the same tread pattern. T Speed rating The tyres could also have the following information: For the sake of the environment • A direction of rotation symbol Old tyres must be disposed of accordi ng to the laws in the country concerned. • “Reinforced” denotes heavy-duty tyres. Note The manufacturing date is also indicated on the tyre sidewall (possibly only • For technical reasons, it is not generally possible to use the wheels from on the inner side of the wheel). other vehicles. This can also apply to wheels of the same model. The use of “DOT. 1103.” means, for example, that the tyre was produced in the 11th wheels or tyres which have not been approved by SEAT for use with your week of 2003. model may invalidate the vehicle's type approval for use on public roads. We recommend that work on tyres and wheels is carried out by an Authorised • If the spare tyre is not the same as the tyres that are mounted on the Service Centre. They are familiar with the procedure and have the necessary vehicle - for example with winter tyres - you should only use the spare tyre for special tools and spare parts as well as the proper facilities for disposing of a short period of time and drive with extra care. Refit the normal road wheel the old tyres. as soon as possible. Any Authorised Service Centre has full information on the technical require- ments when installing or changing tyres, wheels or wheel trims. Wheel bolts WARNING Wheel bolts must be tightened to the correct torque. • We recommend that you use only wheels and tyres that have been The design of wheel bolts is matched to the rims. If different wheel rims are approved by SEAT for your model. Failure to do so could impair vehicle fitted, the correct wheel bolts with the right length and correctly shaped bolt handling. Risk of accident. heads must be used. This ensures that wheels are fitted securely and that the • Avoid running the vehicle on tyres that are more than six years old. If brake system functions correctly. you have no alternative, you should drive slowly and with extra care at all times. In certain circumstances, you may not use wheel bolts from a different car - • Never use old tyres or those with an unknown “history of use”.even if it is the same model ⇒ page 201.

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders