Mini Countryman owners manual page 232

text version of content this owner's manual page from owners manual to the vehicle Mini Countryman, year of production 2010:

Replacing components MOBILITY Using the Mobility Kit When adding sealant, the filling pres- To repair a tire puncture with the Mobility Kit, sure can temporarily increase up to proceed as follows: about 5 bar/73 psi. Do not switch off the > Filling the tire with sealant. compressor during this phase.< > Distributing the sealant. Do not run the compressor for longer than 10 minutes; otherwise, the > Correct the tire inflation pressure. device will overheat and possibly be dam- aged.< Filling the tire with sealant 8. Switch off the compressor. Proceed in the specified order; otherwise, If an inflation pressure of 1.8 bar/26 psi is not sealant may emerge under high pres-reached: sure.< 1. Shake the sealant bottle. 1. Unscrew the filling hose2 from the wheel and drive the vehicle forward and backward 2. Pull the connecting hose6 completely out of approx. 33 ft/10 m to distribute the liquid the compressor housing and screw it onto sealant in the tire evenly. the connector of the sealant bottle. Make 2.Inflate the tire again with the compressor. sure that the hose is not kinked. 3. Insert the sealant bottle on the compressor If an inflation pressure of 1.8 bar/26 psi housing in an upright position. still cannot be reached, then the tire is too heavily damaged. Please contact the nearest MINI dealer.< Stowing Mobility Kit 1. Unscrew filler hose2 of the sealant bottle from the wheel. 2. Unscrew connecting hose of the compressor6 from the sealant bottle. 3. Connect the filler hose 2 of the sealant bot- tle to the unoccupied connection on the 4. Unscrew the dust cap from the valve of the sealant bottle. defective wheel and screw the filling hose 2 This prevents the rest of the sealant from of the sealant bottle onto the valve.escaping from the bottle. 5. Ensure that the compressor is switched off.4.Wrap the empty sealant bottle in suitable 6. Insert the plug 5 into the lighter socket/material to avoid dirtying the cargo area. power socket in the vehicle interior, 5.Stow Mobility Kit back in the vehicle. page101. 7. With the engine running: Distributing the sealant Switch on the compressor and let run for Immediately drive approx. 3.1 miles/5 km so about 3 to 8 minutes in order to add the that the sealant evenly distributes itself. sealant and to achieve an inflation pressure Do not exceed speeds of 50 mph/ of about 1.8 bar/26 psi. 80km/h. If possible, do not drop below 10 mph/ 20km/h.< 231 Online Edition for Part no. 01402917368 - © 10/12 BMW AG

owners manual Mini Countryman

owners manual Mini Countryman - year of production: 2010 - Mini Countryman owners manual EN