owners manual Seat Altea

all ratings: 0 average rating: 5

Checking and refilling levels 227 Wear indicators The original tyres on your vehicle have 1.6 mm high “tread wear indicators” WARNING Ÿ page226, fig. 169 running across the tread. Depending on the make, There is a serious danger of accidents if a tyre bursts during driving! there will be six to eight of them evenly spaced around the tyre. Markings on • The tyres must be replaced at the latest when the tread is worn down to the tyre sidewall (for instance the letters “TWI” or other symbols) indicate the the tread wear indicators. Failure to do so could result in an accident. Worn positions of the tread wear indicators. The minimum tread depth required by tyres do not grip well at high speeds on wet roads. There is also a greater law is 1.6 mm (measured in the tread grooves next to the tread wear indica- risk of “aquaplaning”. tors). Worn tyres must be replaced. Different figures may apply in export • At continuously high speeds, a tyre with insufficient pressure flexes countries Ÿ . more. This causes it to overheat. This can cause tread separation and tyre Tyre pressure blow-out. Risk of accident. Always observe the recommended tyre pres- Incorrect tyre pressure causes premature wear and could cause tyre blow-out. sures. For this reason, the tyre pressure should be checked at least once per month • If tyres show excessive wear, you should have the running gear checked Ÿ page226. by an Authorised Service Centre. Driving style • Keep chemicals such as oil, fuel and brake fluid away from tyres. Fast cornering, heavy acceleration and hard braking all increase tyre wear. • Damaged wheels and tyres must be replaced immediately! Changing wheels around For the sake of the environment If the front tyres are worn considerably more than the rear ones it is advisable Under-inflated tyres will increase fuel consumption. to change them around as shown Ÿ page226, fig. 170. All the tyres will then last for about the same time. Wheel balance Puncture-proof tyres The wheels on new vehicles are balanced. However, various factors encoun- tered in normal driving can cause them to become unbalanced, which results Puncture-proof tyres will usually allow the vehicle to continue in steering vibration. even when one of the tyres has a puncture. Unbalanced wheels should be rebalanced, as they otherwise cause excessive wear on steering, suspension and tyres. A wheel must also be rebalanced Vehicles that are factory-fitted with puncture-proof tyres19) indicate when a new tyre is fitted. on the instrument panel when there is a loss of tyre pressure. Incorrect wheel alignment Incorrect wheel alignment causes excessive tyre wear, impairing the safety of the vehicle. If tyres show excessive wear, you should have the wheel align- ment checked by an Authorised Service Centre. 19) Depending upon version and country. Safety First Operating instructions Tips and Maintenance Technical Data

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders