or
owners manual Nissan Juke
owners manual Nissan Juke - year of production: 2010 - Nissan Juke owners manual EN
Document:
pdf (3.1 MB) 345 pages
all ratings: 0
average rating: 5
text version of content this owner's manual page
from owners manual to the vehicle Nissan Juke, year of production 2010:
Black plate (229,1)
comes too high (for example, when climbingoccurs, vehicle speed may be gradually
steep grades in high temperature with heavyreduced. The reduced speed may be
loads), engine power and, under some condi-lower than other traffic, which could
tions, vehicle speed will be decreased auto-increase the chance of a collision. Be
matically to reduce the chance of transmissionespecially careful when driving. If ne-
damage. Vehicle speed can be controlled withcessary, pull to the side of the road at a
the accelerator pedal, but the engine and vehicle
speed may be limited. safe place and allow the transmission
to return to normal operation, or have it
Fail-safe repaired if necessary.
If the vehicle is driven under extreme
conditions, such as excessive wheel spin-
ning and subsequent hard braking, the
fail-safe system may be activated. The MIL
may illuminate to indicate the fail-safe SSD1142
mode is activated. (See “Malfunction In-
dicator Light (MIL)” in the “2. Instruments Shift lock release
andcontrols” section.) This will occur even If the battery charge is low or discharged, the
ifall electrical circuits are functioning selector lever may not be moved from the P
properly. In this case, place the ignition (Park) position even with the brake pedal
switch in the OFF position and wait for 10 depressed and the selector lever button pushed.
seconds. Then turn the switch back to the
ON position. The vehicle should return to Tomovetheselector lever, perform the following
its normal operating condition. If it does procedure:
not return to its normal operating condi- 1.Models with Intelligent Key system:
tion, have a NISSAN dealer check the
transmission and repair if necessary. Place the ignition switch in the OFF or
LOCKposition.
WARNING Models without Intelligent Key system:
When the high fluid temperature pro- Place the ignition switch in the LOCK
tection mode or fail-safe operation position, and remove the key if it is inserted.
Starting and driving5-19
Model "F15-D" EDITED: 2010/ 6/ 24
Download PDF
Click here to download a pdf file with an instruction manual for Nissan Juke
year of production from: 2010
Do you prefer pdf format?
Find out how to download
Enter the code to download PDF file:
All pages in one PDF file!
How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.
:
Nissan Juke owners manual
pages 226 - 232
Nissan Juke owners manual
page 229 / 345
this site is maintained by advertising - for view instructions, turn off ad blocking in your browser
Download PDF