owners manual BMW M5 E60

all ratings: 0 average rating: 5

ce 4.Screw dust cap off valve of defective wheel 4.Correct tire inflation pressure to 29 psi/ and screw filling hose2 of sealant bottle 200kPa. With the ignition switched on: onto valve. > Increase inflation pressure: switch on 5.Insert sealant bottle on compressor hous-compressor, positionI. To check cur-At a glan ing so that it is positioned upright.rently set inflation pressure, briefly switch off device. Do not allow compressor to run ls longer than 10 minutes, otherwise o the device will overheat and may be dam-r t aged.< n > Reduce inflation pressure: press Co button8 or turn screw8 on pressure gauge. ps If the inflation pressure is not held, drive g ti 6.Make sure that the device is switched off, the vehicle again, refer to Distributing n position 0. sealant. Then repeat steps 1 to 4 once.ivi 7.Insert connector3 into lighter socket in Using the MMobility System can be ineffective Dr vehicle interior, refer to page109.in the event of tire damage greater than approx.0.16in/4mm in size. Please contact the 8.With the ignition switched on: nearest BMW center, refer to page232, or a Switch on the device and allow to run for workshop that works according to BMW repair approx. 3minutes to fill wheel with sealant. procedures with correspondingly trained per- It is not important what inflation pressure sonnel if the tire cannot be made ready for driv- the tire has after filling.ing with the M Mobility System.

Do you prefer pdf format?
Find out how to download

Enter the code to download PDF file:

BMW M5 E60 M Power owners manual
pages 226 - 232

this site is maintained by advertising - for view instructions, turn off ad blocking in your browser

Others owner's manuals for this model:

---