owners manual Mercedes C

all ratings: 0 average rating: 5

BA 204 USA, CA Edition A 2011; 1; 5, en-US2010-05-20T09:17:30+02:00 - Seite 226 hereepe Version: 3.0.3.6 226 Features Possible causes of malfunction: R the on-board voltage of the vehicle is not within the permissible voltage range. R the temperature of the DC/AC converter is momentarily too high. R some small electronic devices have a constant nominal power of less than 150 W, but a very high inrush current. These devices will not work. If you connect such a device, the 115 V power socket : will not supply it with power. The 115 V AC power socket : provides an alternating voltage of 115 V, so that smallIf indicator lamp ; still does not light up, electronic devices can be connected. Theseconsult a specialist workshop, e.g. an devices, such as games consoles, chargersauthorized Mercedes-Benz Center. and laptops, should not consume more than a maximum of 150 W altogether. 25 Requirements for operation of these devices:mbrace R 12 V power sockets in the footwell of the Important safety notes Loading, stowing and features second row of seats and in the stowage ! A license agreement must exist in order compartment must be functioning to activate the mbrace service. Make sure correctly (Y page 224). that your system is activated and ready for R the plug of the electronic device is plugged use, and press the ï MB info call button into the 115 V power socket :. to register. If you cannot carry out any of R the on-board voltage is within a permissible the steps mentioned, the system may not voltage range. be activated. R the maximum wattage of the device to be If you have any questions concerning connected must not exceed 150 W. activation, please contact one of the XOpen flap =. following service hotlines: XInsert the plug of the electrical device into R USA: Response Center under the 115 V power socket :. 866-990-9007 Indicator lamp ; lights up. R Canada: Customer Service under 1-888-923-8367 If indicator lamp ; does not light up, please read the chapter on malfunctions. Shortly after successfully registering with the X mbrace service, a user ID and password will To turn off: disconnect the plug from the be sent to you by post. You can use this 115 V power socket :. password to log in to the mbrace section Ensure that you do not pull on the cord. under "Owners Online" at http:// XClose flap =. 26 www.mbusa.com . The mbrace system is available if: R it has been activated and is operational. Activation requires an available cellular 25 The system is called TELEAID in Canada. 26 USA only.

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders