owners manual Chrysler Crossfire

owners manual Chrysler Crossfire - year of production: 2003, 2004, 2005, 2006, 2007 - Chrysler Crossfire owners manual EN

Document: pdf (1.68 MB) 296 pages

all ratings: 0 average rating: 5

text version of content this owner's manual page from owners manual to the vehicle Chrysler Crossfire, year of production 2003 - 2007:

MAINTAINING YOUR VEHICLE 227 Brake Master Cylinder Use brake fluid approved to MB 331.0, or a DOT 4 brake The fluid level in the master cylinder should be checkedfluid with: minimum dry boiling point (ERBP) 500°F, whenperformingunderhoodservices,orimmediatelyif minimum wet boiling point (WERBP) 356°F, maximum 2 the brake system warning light is on. viscosity 1500 mm /s, conforming to FMVSS 116 and Besuretocleanthetopofthemastercylinderareabefore ISO 4925. removing the cap. If necessary, add fluid to bring the WARNING! fluid level up to the requirements described on the brake fluid reservoir. Fluid level can be expected to fall as theUse of a brake fluid that may have a lower initial brake pads wear. Brake fluid level should be checked boilingpointorunidentifiedastospecification,may whenpadsarereplaced.However,lowfluidlevelmaybe result in sudden brake failure during hard pro- caused by a leak and a checkup may be needed. longed braking. You could have an accident. 7 WARNING! Useonlybrakefluidthathasbeeninatightlyclosed container to avoid contamination from foreign mat- ter. Use of contaminated fluid may result in reduced brake performance or a sudden brake failure. You could have an accident.

Download PDF

Click here to download a pdf file with an instruction manual for Chrysler Crossfire
year of production from: 2003

Do you prefer pdf format?
Find out how to download

Enter the code to download PDF file:

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.