owners manual Alfa Romeo 166

all ratings: 0 average rating: 5

The total absorption of these accessoriesELECTRONIC – If electrical welding is to be carried (standard and installed later) must beout on the body of the vehicle the elec- CONTROL UNITS 0.6 mA x Ah (of the battery), as shown tronic control units must be disconnected in the table below: or removed if the work involves the pro- With normal use of the vehicle no par- ticular precautions need to be taken.duction of high temperatures. Battery Maximum permissible loadless absorptionIf interventions are to be carried out on 100 Ah 60 mA WARNING the electrical system or emergency start- ing the following must be heeded: If additional systems are to be installed on the ve- You are also reminded that services with– Always switch off the engine before disconnecting the battery from the electri- hicle the danger of incorrectly tak- high current absorption activated by the ing branches from the electrical cal system. user, such as bottle warmers, vacuum wires cannot be emphasized too cleaners, cellular telephone, mini refriger- strongly especially if devices es- – If battery charging is necessary dis- ator, etc. accelerate the battery drainage sential to the safety of the vehi- connect it from the electric system. process if they are powered with the en- cle and its occupants are involved gine not running. – When starting in an emergency only an auxiliary battery must be used and not(ignition, injection, ABS .). The in- a battery charger. correct installation of radio sys- IMPORTANT It should also be noted tems, electronic theft alarms, ra- that improper branches on connectors of – Check that the polarity is correct and the electric wiring for installing additional diotelephones etc. can interfere that the connections between the battery equipment is dangerous, particularly if with the electronic control units and safety devices are involved.and the electrical system are sound.compromises the warranty cover. For these interventions we re-com- – Before connecting or disconnecting mend that you contact Alfa Romeo the terminals of the electronic units en- Authorized Services.The loadless sure that the ignition key is not in the MARposition. absorption of all the accessories in- stalled in the after market must – Do not check for current in the cables by short-circuiting the ends.not exceed 20 mA (reading with the vehicle stationary). 223

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders