owners manual Seat Toledo

all ratings: 0 average rating: 5

toledo ingles.book Seite 221 Mittwoch, 11. April 2007 1:25 13 Checking and refilling levels221 Brake fluid However, if the level goes down noticeably in a short time, or drops below the “MIN” mark, there may be a leak in the brake system. A display on the instru- ment panel will warn you if the brake fluid level is too low ⇒ page 72. Checking the brake fluid level The brake fluid is checked at the intervals given in the service WARNING schedule. Before opening the bonnet to check the brake fluid level, read and observe the warnings ⇒ page208. Changing the brake fluid The Maintenance Program indicates the brake fluid change intervals. We recommend that you have the brake fluid changed by an Authorised Service Centre. Before opening the bonnet, please read and follow the warnings ⇒ in Fig. 171 In the engine “Safety instructions on working in the engine compartment” on page 208 in compartment: Brake fluid “Working in the engine compartment”. reservoir cover Brake fluid absorbs moisture. In the course of time, it will absorb water from – Read off the fluid level at the transparent brake fluid reservoir. It the ambient air. If the water content in the brake fluid is too high, the brake should always be between the “MIN” and “MAX” marks.system could corrode. This also considerably reduces the boiling point of the brake fluid. Heavy use of the brakes may then cause a vapour lock which could impair the braking effect. The position of the brake fluid reservoir is shown in the corresponding engine compartment diagram ⇒page272. The brake fluid reservoir has a black and It is important that you use only use brake fluid compliant with the US yellow cap. standard FMVSS 116 DOT 4. We recommend the use of Genuine SEAT brake fluid. The brake fluid level drops slightly when the vehicle is being used as the brake pads are automatically adjusted as they wear. WARNING Brake fluid is poisonous. Old brake fluid impairs the braking effect. Safety First Operating instructions Tips and Maintenance Technical Data

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders