owners manual Lexus GS

all ratings: 0 average rating: 5

220 4-3. Operating the lights and wipers ■Camera sensor detection information ●The high beam may not be automatically turned off in the following situations: • When oncoming vehicles suddenly appear from a curve • When the vehicle is cut in front of by another vehicle • When vehicles ahead are hidden from sight due to repeated curves, road dividers or roadside trees • When vehicles ahead appear from the faraway lane on wide road • When vehicles ahead have no lights ●The high beam may be turned off if a vehicle ahead that is using fog lights without using the headlights is detected. ●House lights, street lights, traffic signals, and illuminated billboards or signs may cause the high beam to switch to the low beams, or the low beams to remain on. ●The following factors may affect the amount of time taken to turn the high beam on or off: • The brightness of headlights, fog lights, and tail lights of vehicles ahead • The movement and direction of vehicles ahead • When vehicle ahead only has operational lights on one side • When vehicle ahead is a two-wheeled vehicle • The condition of the road (gradient, curve, condition of the road surface etc.) • The number of passengers and amount of luggage ●The high beam may be turned on or off when the driver does not expect it. ●Bicycles or similar objects may not be detected. ●In the situations shown below, the system may not be able to accurately detect sur- rounding brightness levels. This may cause the low beams to remain on or the high beams to cause problems for pedestrianhicles, vse ahead or other parties. In these cases, manually switch between the high and low beams. • In bad weather (rain, snow, fog, sandstorms etc.) • The windshield is obscured by fog, mist, ice, dirt etc. • The windshield is cracked or damaged. • The camera sensor is deformed or dirty. • The camera sensor temperature is extremely high. • Surrounding brightness levels are equal to those of headlights, tail lights or fog lights. • Vehicles ahead have headlights that are either switched off, dirty, are changing color, or have are not aimed properly. • When driving through an area of intermittently changing brightness and darkness. • When frequently and repeatedly driving ascending/descending roads, or roads with rough, bumpy or uneven surfaces (such as stone-paved roads, gravel tracks etc.). • When frequently and repeatedly taking curves or driving on a winding road. • There is a highly reflective object ahead of the vehicle, such as a sign or a mirror. • The back of a vehicle ahead is highly reflective, such as a container on a truck. • The vehicle’s headlights are damaged or dirty, or are not aimed properly. • The vehicle is listing or tilting, due to a flat tire, a trailer being towed etc. • The high beam and low beam are repeatedly being switched between in an abnor- mal manner. • The driver believes that the high beam may be causing problems or distress to other drivers or pedestrians nearby. GS350_200t_GS F_OM_OM30E86U_(U)

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders