owners manual Seat Leon

all ratings: 0 average rating: 5

220 Driver assistance systems 1) Switching on Automatic activation When the parking aid (ParkPilot) is automatically switched on this is shown – Engage reverse gear or in miniature on the left side of the display. – Press the  button on the centre console ⇒ Fig. 149. A short When slowly approaching an obstacle located in front of the vehicle, the au- confirmation signal will be heard and the button symbol will tomatic activation only functions each time the speed is reduced below ap- light up yellow. proximately 10 km/h (6 mph) for the first time. If the parking aid is deactiva- ted using the  button, the following actions must be carried out in order With certain equipment (Adaptive Cruise Control), the system will for it to automatically reactivate: be switched on automatically when the vehicle reverses a given distance (approx. 10 cm if an obstacle is detected at the rear and ● Switch off the ignition and switch it on again. approx. 20 cm if no obstacle is detected at the rear). ● OR: Accelerate above 10 km/h (6 mph) before reducing speed below this number again. Switching off ● OR: Place the selector lever in position P and then move it from this po- sition. – Drive forwards at more than 10 km/h (6 mph), or ● OR: Switch on and off the automatic activation in the Easy Connect sys- – Press the  button, or tem menu. – Switch the ignition off The automatic activation with parking aid miniature indication can be switched on and off from the Easy Connect system menu ⇒ page 81: Segments of the visual indication ● Switch the ignition on. The distance of separation from the obstacle can be estimated using the ● Press button  . segments around the vehicle. With certain equipment (Radio Standard), the yellow lines* mark the estimated path, depending on the angle of the ● Press the Setup function button. turned steering wheel. A white segment is seen when an obstacle is detec- ● Press the Parking and Manoeuvring function button. ted out of the path of the vehicle. The red segments represent obstacles de- ● Select the parking aid (ParkPilot) from the list. tected within the path. As the vehicle approaches an obstacle, the seg- ● Automatic activation. ments are displayed closer to the vehicle. When the penultimate segment is displayed, this means that the vehicle has reached the collision zone. In the  When the function button check box is activated , the function is on. collision zone, obstacles are represented in red, including those out of the path. Do not continue to move forward (or backward) ⇒  in General infor- mation on page 218, ⇒  in General information on page 218 ! 1) Available only with certain equipment.

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders