BMW X3 F25 owners manual page 222

text version of content this owner's manual page from owners manual to the vehicle BMW X3 F25, year of production 2010:

Seite 218 Mobility Replacing components Do not perform work/bulb replacement Rear: replacing the wiper blades on xenon headlights 1. Lift off the wiper fully and pull off the wiper blade, arrow. Have any work on the xenon lighting system, including bulb replacement, performed only by a service center. Due to the high voltage present in the system, there is a danger of fatal injuries if work is carried out improperly.◀ Do not touch the bulbs Do not touch the glass of new bulbs with your bare hands, as even minute amounts of contamination will burn into the bulb's surface and reduce its service life. 2. Attach a new wiper blade. It must engage Use a clean tissue, cloth or something similar, audibly. or hold the bulb by its base.◀ 3. Fold down the wipers. Light-emitting diodes (LEDs) Some items of equipment use light-emitting Lamp and bulb replacement diodes installed behind a cover as a light source. Hints These light-emitting diodes, which are related to conventional lasers, are officially designated Lights and bulbs as Class 1 light-emitting diodes. Lights and bulbs make an essential contribu‐ tion to vehicle safety. Do not remove the covers The manufacturer of the vehicle recommends Do not remove the covers, and never that you entrust corresponding procedures tostare into the unfiltered light for several hours; the service center if you are unfamiliar those orotherwise, irritation of the retina could result.◀ if they have not been described here. You can obtain a selection of replacement Headlight glass bulbs at the service center. Condensation can form on the inside of the ex‐ ternal lights in cool or humid weather. When Danger of burns driving with the light switched on, the conden‐ Only change bulbs when they are cool; sation evaporates after a short time. The head‐ otherwise, there is a danger of getting light glass does not need to be changed. burned.◀ If the headlights do not dim despite driving Working on the lighting system with the light switched on, increasing humidity forms, e. g. water droplets in the light, have the When working on the lighting system, service center check this. you should always reel off the lights affected to prevent short circuits. Headlight setting To avoid possible injury or equipment damage The headlight adjustments can be affected by when replacing bulbs, observe any instructions changing lights and bulbs. Have the head‐ provided by the bulb manufacturer.◀ 218 Online Edition for Part no. 01 40 2 960 386 - II/15

owners manual BMW X3 F25

owners manual BMW X3 F25 - year of production: 2010 - BMW X3 F25 owners manual EN