owners manual Jeep Wrangler

owners manual Jeep Wrangler - year of production: 1997 - Jeep Wrangler TJ 2013 owners manual EN

Document: pdf (5.42 MB) 666 pages

all ratings: 0 average rating: 5

text version of content this owner's manual page from owners manual to the vehicle Jeep Wrangler, year of production 1997:

20 THINGS TO KNOW BEFORE STARTINGYOUR VEHICLE Customer Key Programming 4. Insert a blank Sentry Key® into the ignition switch. If you have two valid Sentry Keys®, you can programTurn the ignition switch to the ON/RUN position new Sentry Keys® to the system by performing thewithin 60 seconds. After 10 seconds, a single chime following procedure: will sound. In addition, the Vehicle Security Light will stop flashing. To indicate that programming is com- 1. Cut the additional Sentry Key® Transponder blank(s)plete, the Vehicle Security Light will turn on again for to match the ignition switch lock cylinder key code.three seconds and then turn off. 2. Insert the first valid key into the ignition switch. TurnThe new Sentry Key® is programmed. The Remote Key- the ignition switch to the ON/RUN position for atless Entry (RKE) transmitter will also be programmed least three seconds, but no longer than 15 seconds.during this procedure. Then, turn the ignition switch to the LOCK positionRepeatthisproceduretoprogramuptoeightkeys.Ifyou and remove the first key. do not have a programmed Sentry Key®, contact your 3. Insert the second valid key into the ignition switch.authorized dealer for details. Turn the ignition switch to the ON/RUN positionNOTE: If a programmed key is lost, see your authorized within 15 seconds. After 10 seconds, a chime willdealer to have all remaining keys erased from the system’s sound. In addition, the Vehicle Security Light willmemory. This will prevent the lost key from starting your begin to flash. Turn the ignition switch to the LOCKvehicle. The remaining keys must then be reprogrammed. position and remove the second key.All vehicle keys must be taken to an authorized dealer at the time of service to be reprogrammed.

Download PDF

Click here to download a pdf file with an instruction manual for Jeep Wrangler
year of production from: 1997

Do you prefer pdf format?
Find out how to download

Enter the code to download PDF file:

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.