owners manual Jeep Compass

all ratings: 0 average rating: 5

216 SAFETY 1. Place the child seat in the center of the seating position.6. Try to pull the webbing out of the retractor. If it is For some second row seats, you may need to recline thelocked, you should not be able to pull out any webbing. seat and/or raise the head restraint to get a better fit. IfIf the retractor is not locked, repeat step 5. the rear seat can be moved forward and rearward in the7. Finally, pull up on any excess webbing to tighten the lap vehicle, you may wish to move it to its rear-mostportion around the child restraint while you push the position to make room for the child seat. You may alsochild restraint rearward and downward into the vehicle movethefront seat forward to allow more room for theseat. child seat. 2. Pull enough of the seat belt webbing from the retractor8. If the child restraint has a top tether strap and the to pass it through the belt path of the child restraint. Doseating position has a top tether anchorage, connect the not twist the belt webbing in the belt path.tether strap to the anchorage and tighten the tether strap. See the section “Installing Child Restraints Using 3. Slide the latch plate into the buckle until you hear athe Top Tether Anchorage” for directions to attach a “click.” tether anchor. 4. Pull on the webbing to make the lap portion tight9. Test that the child restraint is installed tightly by pulling against the child seat. back and forth on the child seat at the belt path. It 5. To lock the seat belt, pull down on the shoulder part ofshould not move more than 1 inch (25.4 mm) in any the belt until you have pulled all the seat belt webbingdirection. out of the retractor. Then, allow the webbing to retractAny seat belt system will loosen with time, so check the back into the retractor. As the webbing retracts, you willbelt occasionally, and pull it tight if necessary. hear a clicking sound. This means the seat belt is now in the Automatic Locking mode.

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders