owners manual Mazda 6

owners manual Mazda 6 - year of production: 2007, 2008, 2009, 2010, 2011, 2012 - Mazda 6 II 2 owners manual EN

Document: pdf (4.83 MB) 464 pages

all ratings: 0 average rating: 5

text version of content this owner's manual page from owners manual to the vehicle Mazda 6, year of production 2007 - 2012:

Mazda6_8Z64-EA-08H_Edition1 Page216 Wednesday, June 25 2008 10:4 AM Black plate (216,1) Driving Your Mazda Switches and Controls TheHomeLinksystemprovides3buttons 5. Press and hold the just-trained which can be individually selected and HomeLinkbuttonandobservethe programmed using the transmitters for indicator light. current, on-market devices as follows:If the indicator light stays on constantly, 1. Press and hold the two outer programmingiscompleteandyour HomeLinkbuttons (buttons one and device should activate when the three) ― releasing only when the HomeLinkbuttonispressed and released. indicator light begins to flash (after 20NOTE seconds). Do not hold the buttons forTo program the remaining two HomeLink longer than 30 seconds and do not buttons, begin with “Programming” ― step 2. repeat step 1 to program a second and/Donotrepeatstep 1. or third hand-held transmitter to the remaining two HomeLink buttons. If the indicator light blinks rapidly for 2. Position the end of your hand-heldtwosecondsandthenturnstoa transmitter 2.5―7.5 cm (1―3 inches)constant light, continue with awayfromtheHomeLinkbuttonyou “Programming”steps 6―8tocomplete wish to program while keeping the the programming of a rolling code indicator light in view. equipped device (most commonly a garage door opener). 3. Simultaneously press and hold both the chosen HomeLink and hand-held 6. At the garage door opener receiver transmitter buttons. Do not release the(motor-head unit) in the garage, locate buttons until step 4 has been the “learn” or “smart” button. This can completed. usually be found where the hanging antenna wire is attached to the motor- NOTE head unit. Somegateoperators and garage dooropeners7. Firmly press and release the “learn” or mayrequire you to replace this Programming Step 3 with procedures noted in the “Gate“smart” button. (The name and color of Operator/Canadian Programming” section.the button may vary by manufacturer.) 4. After the HomeLink indicator lightNOTE changes from a slow to a rapidly There are 30 seconds in which to initiate step blinking light, release both the 8. HomeLinkandhand-heldtransmitter 8. Return to the vehicle and firmly press, buttons. hold for two seconds and release the NOTE programmed HomeLink button. Repeat If the HomeLink indicator light does notthe “press/hold/release” sequence a change to a rapidly blinking light, contactsecond time, and, depending on the HomeLinkatwww.homelink.comorcall1- brand of the garage door opener (or 800-355-3515 for assistance. other rolling code equipped device), repeat this sequence a third time to complete the programming process. 5-72 Form No.8Z64-EA-08H

Download PDF

Click here to download a pdf file with an instruction manual for Mazda 6
year of production from: 2007

Do you prefer pdf format?
Find out how to download

Enter the code to download PDF file:

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.