or
owners manual Hyundai Getz
owners manual Hyundai Getz - year of production: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 - Hyundai Getz omistajan kasikirja FI
Document:
pdf (8.59 MB) 239 pages
all ratings: 0
average rating: 5
text version of content this owner's manual page
from owners manual to the vehicle Hyundai Getz, year of production 2002 - 2011:
DO-IT-YOURSELF MAINTENANCE 6- 29
G290A01FC-GAT Horizontal aiming G290B01TB-GAT
HEADLIGHT AIMING ADJUST- Vertical Adjustment After Headlight As-
MENT aiming sembly Replacement
Before performing aiming adjustment, Vertical line
make sure of the following. 30mm (1.18 in.)
Horizontal line W
1. Keep all tires inflated to the correct "P"
pressure.
2. Place the vehicle on level ground Cut-off line H
and press the front bumper and rear
bumper down several times. Place HTB269
the vehicle at a distance of 3,000 L Ground
mm (118 in.) from the test wall. 5. Open the hood. H line
6. Draw the vertical line (through the
3. See that the vehicle is unloaded
center of each headlight beam pat- G290B01HR-1
(except for full levels of coolant,
tern) and the horizontal line (throughIf the vehicle has had front body repair
engine oil and fuel, and spare tire,
the center of each headlight beam
jack, and tools). and the headlight assembly has been
4. Clean the head lights lens and turn pattern) on the aiming screen. replaced, the headlight aiming should
on the headlight (low beam). be checked using the aiming screen as
And then, draw the horizontal paral- shown in the illustration. Turn on the
lel line at 30 mm (1.18 in.) under theheadlight switch. (Low Beam Position)
horizontal line.
1. Adjust headlights so that main axis
7. Adjust each cut-off line of the low
of light is parallel to center line of the
beam to the parallel line with a phillipsbody and is aligned with point "P"
screwdriver - VERTICAL AIMING. shown in the illustration.
8. Adjust each cut-off line of the low
2. Dotted lines in the illustration show
beam to each vertical line with a
the center of headlights.
phillips screwdriver - HORIZONTAL
AIMING.
TBENG_6.P65 29 7/29/2005, 10:34 AM
Download PDF
Click here to download a pdf file with an instruction manual for Hyundai Getz
year of production from: 2002
Do you prefer pdf format?
Find out how to download
Enter the code to download PDF file:
All pages in one PDF file!
How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.
:
Hyundai Getz omistajan kasikirja
pages 212 - 218
Hyundai Getz omistajan kasikirja
page 215 / 239
this site is maintained by advertising - for view instructions, turn off ad blocking in your browser
Download PDF