Nissan Cube III 3 owners manual page 215

text version of content this owner's manual page from owners manual to the vehicle Nissan Cube, year of production 2008:

Black plate (219,1) WARNING position. Apply the parking brake if the selectorCAUTION lever is in any position while the engineTo prevent transmission damage, move is not running. Failure to do so couldthe selector lever to the P (Park) or R causethevehicletomoveunexpectedly(Reverse) position only when the vehi- or roll away and result in seriouscle is completely stopped. personal injury or property damage. If the ignition switch is placed in the OFF orP(Park): ACC position for any reason while the selectorUse this selector position when the vehicle is lever is in any positions other than the P (Park),parked or when starting the engine. Make sure the ignition switch cannot be placed in thethe vehicle is completely stopped. The brake SSD0862LOCKposition. pedal must be depressed and the selector Shifting If the ignition switch cannot be placed in thelever button pushed in to move the selec- LOCKposition, perform the following steps:tor lever from N (Neutral) or any drive To move the selector lever, position to P (Park). Apply the parking brake. 1.Apply the parking brake when the vehicle isWhen parking on a hill, apply the parking brake : Push the button Awhile depressing * stopped. first, then move the selector lever to the P (Park) the brake pedal. position. 2.Place the ignition switch in the ON position : Push the button A . * while depressing the foot brake pedal.R(Reverse): : Just move the selector lever.3.Move the selector lever to the P (Park)Use this position to back up. Make sure the After starting the engine, fully depress the brakeposition.vehicle is completely stopped before selecting pedal, push the selector lever button and move the R (Reverse) position. The brake pedal the selector lever from the P (Park) position to4.Models with Intelligent Key system:must be depressed and the selector lever any of the desired shift positions.Place the ignition switch in the OFF position.button pushed in to move the selector Models without Intelligent Key system:lever from P (Park), N (Neutral) or any driving position to R (Reverse). Place the ignition switch in the LOCK Starting and driving5-15 Model "Z12-D" EDITED: 2009/ 9/ 17

owners manual Nissan Cube

owners manual Nissan Cube - year of production: 2008 - Nissan Cube III 3 owners manual EN