owners manual BMW M3 E92

owners manual BMW M3 E92 - year of production: 2007, 2008, 2009, 2010, 2011, 2012 - M Power M3 owners manual EN

Document: pdf (9.19 MB) 250 pages

all ratings: 0 average rating: 5

text version of content this owner's manual page from owners manual to the vehicle BMW M3 E92, year of production 2007 - 2012:

e Before using the M Mobility System, fol-Using the MMobility Systemc n low the instructions on the sealant bot- a To repair a flat tire with the M Mobility System, l g tle.< proceed as follows: a Remove the label with the speed restriction > Fill the sealant, refer to page213.At from the sealant bottle and apply it to the steer-> Distribute the sealant, refer to page214. ing wheel. Please note the expiry date on the sealant > Produce the tire inflation pressure, refer to bottle.< page214. ls o r Filling the sealant t Components of the MMobility System n Strictly follow the specified sequence, Co otherwise the sealant may escape under high pressure.< ps 1. Shake the sealant bottle. 2. Screw hose 9 onto the connector of the g ti sealant bottle. in iv r 3. Ensure that screw 8 on the pressure gauge D is closed. 4. Unscrew the dust cap from the valve of the 1 Sealant bottle and label with speed restric-defective wheel and screw filling hose2 of on i tion the sealant bottle onto the valve.t ga 2 Filling hose from sealant bottle to wheel5. Insert the sealant bottle into the housing of i v the compressor so that the bottle is upright.Na t n e m n i a t r e t En s n o i t 3 Connector and cable for the cigarette a lighter socket 6. Ensure that the device is switched off, posi-c tion 0. uni 4 Holder for the sealant bottle m m 5 Compressor 7. Insert connector 3 into the cigarette lighter o socket in the interior of the vehicle, refer to C 6 On/off switch page102. 7 Pressure gauge for displaying the tire infla-8. With the ignition switched on: tion pressure Switch on the device and let it run for 8 Screw on pressure gauge to reduce tire approx. 3 minutes to fill the sealant. The lity inflation pressure inflation pressure of the tire after filling is bi o 9 Hose to connect compressor and sealant unimportant. M bottle or compressor and wheel9. Switch off the device. The connector, cable and connection hose are 10. Detach the hoses from the sealant bottle e stored in the compressor housing. c connector and from the tire valve.n re e 213 f Re

Download PDF

Click here to download a pdf file with an instruction manual for BMW M3 E92
year of production from: 2007

Do you prefer pdf format?
Find out how to download

Enter the code to download PDF file:

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.