owners manual Jeep Compass

all ratings: 0 average rating: 5

212 SAFETY To Install A LATCH-Compatible Child Restraint4. If the child restraint has a tether strap, connect it to the If the selected seating position has a Switchable Automatictop tether anchorage. See the section “Installing Child Locking Retractor (ALR) seat belt, stow the seat belt,Restraints Using the Top Tether Anchorage” for direc- following the instructions below. See the section “Installingtions to attach a tether anchor. Child Restraints Using the Vehicle Seat Belt” to check what5. Tighten all of the straps as you push the child restraint type of seat belt each seating position has. rearward and downward into the seat. Remove slack in 1. Loosen the adjusters on the lower straps and on thethe straps according to the child restraint manufactur- tether strap of the child seat so that you can more easilyer’s instructions. attach the hooks or connectors to the vehicle anchor-6. Test that the child restraint is installed tightly by pulling ages. back and forth on the child seat at the belt path. It 2. Place the child seat between the lower anchorages forshould not move more than 1 inch (25.4 mm) in any that seating position. For some second row seats, youdirection. may need to recline the seat and / or raise the headHowToStowAnUnusedSwitchable-ALR (ALR) restraint to get a better fit. If the rear seat can be movedSeat Belt: forward and rearward in the vehicle, you may wish toWhenusingtheLATCHattachingsystemtoinstall a child move it to its rear-most position to make room for therestraint, stow all ALR seat belts that are not being used by child seat. You may also move the front seat forward toother occupants or being used to secure child restraints.An allow more room for the child seat. unused belt could injure a child if they play with it and 3. Attach the lower hooks or connectors of the childaccidentally lock the seat belt retractor. Before installing a restraint to the lower anchorages in the selected seatingchild restraint using the LATCH system, buckle the seat position. belt behind the child restraint and out of the child’s reach. If the buckled seat belt interferes with the child restraint installation, instead of buckling it behind the child re- straint, route the seat belt through the child restraint belt

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders