owners manual Nissan Micra

all ratings: 0 average rating: 5

Black plate (212,1) STARTING ENGINE (model with Intelligent Key system) GUID-550B631B-68A2-4F99-A948-04AAF8C3D969 . If it becomes necessary to start the engine GASOLINE ENGINE CAUTION: with a booster battery and jumper cables, GUID-EAD13246-6BD8-48E1-AC5E-0F549108B776 the instructions and cautions contained in 1. Apply the parking brake. . As soon as the engine has started, release the “6. In case of emergency” section should 2. Automatic Transmission (AT)/Continuously the ignition switch immediately. be carefully followed. Variable Transmission (CVT) model: . Do not operate the starter for more than 15 7. Allow the engine to idle for at least 30 seconds Move the shift lever to the “P” (Park) or the “N” seconds at a time. If the engine does not after starting the engine to warm-up. Drive at (Neutral) position. start, push the ignition switch to the “OFF” moderate speeds for a short distance first, Thestarter is designed to operate only when position and wait 10 seconds before crank- especially in cold weather. the shift lever is in the proper position. ing the engine again. Otherwise, the starter Manual Transmission (MT) model: could be damaged. CAUTION: Move the shift lever to the “N” (Neutral) positionIf it becomes necessary to start the engine Do not leave the vehicle unattended while the Thestarterisdesignedtonotoperateunless with a booster battery and jumper cables, engine is warming up. the clutch pedal is fully depressed. the instructions and cautions contained in the “6. In case of emergency” section should The Intelligent Key must be carried when be carefully followed. operating the ignition switch. 3. Push the ignition switch to the “ON” position.5. Allow the engine to idle for at least 30 seconds Depress the brake pedal (AT/CVT model) or the after starting the engine to warm-up. Drive at clutch pedal (MT model) and push the ignition moderate speeds for a short distance first, switch to start the engine. especially in cold weather. To start the engine immediately, push and release CAUTION: the ignition switch while depressing the brake pedal or clutch pedal with the ignition switch inDo not leave the vehicle unattended while the any position. engine is warming up. 4. Immediately release the ignition switch when the6.To stop the engine, move the shift lever to the “P” engine starts. If the engine starts, but fails to run,(Park) position (AT/CVT model) or move the shift repeat the above procedures. lever to the “N” (Neutral) position (MT model), If the engine is very hard to start in extremely coldapply the parking brake and push the ignition or hot weather, depress the accelerator pedal and switch to the “OFF” position. hold it. Push the ignition switch for up to 15 seconds while holding. Release the accelerator pedal when the engine starts. 5-10 Starting and driving Condition: [ Edit: 2013/ 2/ 25Model: K13-A ]

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders