or
owners manual BMW X3 F25
owners manual BMW X3 F25 - year of production: 2010 - BMW X3 F25 owners manual EN
Document:
pdf (5.51 MB) 257 pages
all ratings: 0
average rating: 5
text version of content this owner's manual page
from owners manual to the vehicle BMW X3 F25, year of production 2010:
Seite 207
Wheels and tires Mobility
This prevents leftover sealant from escap‐
Snow chains
ing from the container.
4. Wrap the empty sealant container in suita‐Fine-link snow chains
ble material to avoid dirtying the cargo
Only certain types of fine-link snow chains
area.
have been tested by the manufacturer of the
5. Stow the Mobility System back in the vehi‐vehicle, classified as road-safe and approved.
cle.
Information about the approved snow chains
are available from the service center.
Distributing the sealant
Immediately drive approx. 5 miles/10 km to en‐Use
sure that the sealant is evenly distributed in the
Use only in pairs on the rear wheels, equipped
tire.
with the tires of the following size:
Do not exceed a speed of 50 mph/80 km/h.
▷ 205/65 R 17.
If possible, do not drive at speeds less than
▷ 225/60 R 17.
12 mph/20 km/h.
▷ 245/50 R 18.
▷ 245/45 R 19.
To correct the tire inflation pressure
1. Stop at a suitable location. No snow chains on size 245/55 R 17 tires
2. Screw the connection hose of the com‐ Do not mount snow chains on size
pressor directly onto the tire valve stem.245/55 R 17 tires; otherwise, the vehicle may
become damaged.◀
3. Insert the connector into the power socket
inside the vehicle.
Follow the snow chain manufacturer's instruc‐
4. Correct the tire inflation pressure to tions.
2.5 bar.
Make sure that the snow chains are always
▷ Increase pressure: with the ignition sufficiently tight. Retighten as needed accord‐
turned on or the engine running, reeling to the chain manufacturer's instructions.
on the compressor.
Do not initialize the Flat Tire Monitor after
▷ To reduce the pressure: press the but‐mounting snow chains, as doing so may result
ton on the compressor. in incorrect readings.
Do not initialize the Tire Pressure Monitor after
Continuing the trip
mounting snow chains, as doing so may result
Do not exceed the maximum permissible in incorrect readings.
speed of 50 mph/80 km/h.
When driving with snow chains, briefly activate
Reinitialize the Flat Tire Monitor. Dynamic Traction Control if needed.
Reinitialize the Tire Pressure Monitor.
Maximum speed with snow chains
Replace the defective tire and the sealant con‐
Do not exceed a speed of 30 mph/50 km/h
tainer of the Mobility System as soon as possi‐
when using snow chains.
ble.
207
Online Edition for Part no. 01 40 2 960 386 - II/15
Download PDF
Click here to download a pdf file with an instruction manual for BMW X3 F25
year of production from: 2010
Do you prefer pdf format?
Find out how to download
Enter the code to download PDF file:
All pages in one PDF file!
How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.
:
BMW X3 F25 owners manual
pages 208 - 214
BMW X3 F25 owners manual
page 211 / 257
this site is maintained by advertising - for view instructions, turn off ad blocking in your browser
Download PDF
Others owner's manuals for this model: