owners manual Chrysler 300M

owners manual Chrysler 300M - year of production: 1999, 2000, 2001, 2002, 2003, 2004 - Chrysler 300M owners manual EN

Document: pdf (5.97 MB) 277 pages

all ratings: 0 average rating: 5

text version of content this owner's manual page from owners manual to the vehicle Chrysler 300M, year of production 1999 - 2004:

MAINTAINING YOUR VEHICLE 211 Drive Shaft Universal Joints Hood Latch Your vehicle has four constant velocity universal joints.When performing other under hood services, the hood Periodic lubrication of these joints is not required. How-latch release mechanism and safety catch should be ever, the joint boots should be inspected for externalinspected, cleaned, and lubricated. leakage or damage when other maintenance is per-It is important to maintain proper lubrication to insure formed. that the hood mechanisms work properly and safely. If leakage or damage is evident, replace the universalMulti-Purpose Lubricant, NLGI Grade 2, should be ap- joint boot and grease immediately.plied sparingly to all pivot and sliding contact areas. Continuedoperationcouldresultinfailure of the univer-External Lock Cylinders sal joint due to water and dirt contamination of theLubricate the external lock cylinders twice a year, prefer- grease. This would require complete replacement of theably in the fall and spring. Apply a small amount of joint assembly. lubricant, such as Mopar Lock Cylinder Lubricant, di- 7 Body Lubrication rectly into the lock cylinder (avoid excess lubricant). Body and other operating mechanisms and linkagesInsert the key into the lock cylinder and rotate from the shouldbeinspected,cleaned,andlubricated,asrequired,unlocked to the locked position; without adding more to maintain ease of operation and to provide protectionlubricant. Repeat this procedure three or four times. Wipe against rust and wear. all the lubricant off the key with a clean cloth, to avoid soiling clothing. Before the application of any lubricant, the parts con-If you use a lubricant that cannot be dispensed directly cerned should be wiped clean to remove dust and grit;into the lock cylinder, apply a small amount of the after lubricating, excess oil or grease should be removed.lubricant to the key. Insert the key into the lock cylinder,

Download PDF

Click here to download a pdf file with an instruction manual for Chrysler 300M
year of production from: 1999

Do you prefer pdf format?
Find out how to download

Enter the code to download PDF file:

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.