owners manual Seat Ateca

all ratings: 0 average rating: 5

Operation Overtaking Narrow or misaligned vehicles››› Fig. 183 D. In these cases, you should brake as necessary. urn signal lights up before the ve-The radar sensor can only detect narrow or When the t hicle begins an overtaking manoeuvre, themisaligned vehicles when they are within Vehicles driving in the opposite direction ACC accelerates the vehicle automaticallyrange ››› Fig. 182 B. This applies particularly and vehicles crossing your path and thus reduces the distance from the vehi-to narrow vehicles such as motorbikes. In cle in front. these cases, you should brake as necessary.The ACC does not react to vehicles approach- ing from the opposite direction or vehicles When the vehicle enters the overtaking lane, Vehicles with special loads and accessoriescrossing your path. if the ACC does not detect another vehicle in front, it accelerates until it reaches the pro-Special loads and accessories of other vehi- Metal objects grammed speed and maintains it.cles that jut out over the sides, backwards or over the top may be out of the ACC's range.Metal objects, e.g. rails on the road or sheets System acceleration can be interrupted at used in road works, can confuse the radar any time by pressing the brake or moving theSwitch off the ACC when driving behind vehi- sensor and cause the ACC to react wrongly. third lever backwards ››› page 201.cles with special loads and accessories or when overtaking them. In these cases, you Factors that may affect how the radar sensor should brake as necessary. Driving through a bend operates On entering or exiting bends, the radar sen- Other vehicles changing lanesIf laser sensor operation is impaired, due to sor may no longer determine the vehicle in heavy rain, spray, snow or mud, the ACC is front or react to a vehicle in the adjacent laneVehicles changing lanes a short distance deactivated temporarily. The relevant text ››› Fig. 182 A. In these situations the vehicleaway from your own can only be detected message will appear in the dash panel dis- may brake unnecessarily or fail to react to re-when they are within range of the sensors. play. If necessary clean the SEAT act to the vehicle in front. In this case, theConsequently, the ACC will take longer to re- badge ››› Fig. 177. driver has to intervene by accelerating or in-act ››› Fig. 183 C. In these cases, you should terrupting the braking process by applyingbrake as necessary.When the radar sensor begins to operate the brake or pushing the third lever back- properly again, the ACC will automatically be wards ››› page 201. Stationary vehicles available again. The message on the instru- ment panel screen will switch off and the ACC The ACC does not detect stationary objects Driving in tunnels will be reactivated again. while driving, such as traffic tails or damaged When driving through tunnels the radar sen-vehicles. ACC operation may be affected by a strong ra- sor may be limited. Switch off the ACC in tun- dar reverse reflection, for example in a closed If a vehicle detected by the ACC turns or nels. car park. moves over and there is a stationary vehicle in front of it, the ACC will not react to it 206

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders