owners manual Nissan Qashqai

all ratings: 0 average rating: 5

mirrors) will illuminate. If the turn signal is then acti-signal. If a vehicle comes into the detection zone– Avehicleapproachingrapidlyfrombehind. vated, the system chimes (twice) and the Blind spotafter the driver activates the turn signal, then only (See “BSW driving situations” later in this indicator light will start flashing bright orange to alertthe Blind Spot Indicator light flashes and no chimesection.) you to the presence of vehicle(s) in the adjacent sounds. (See “BSW driving situations” later in this – Avehiclewhichyourvehicleovertakesrap- lane. section.) idly. (See “BSW driving situations” later in TheBlind spot indicator light continues to flash untilTurning the BSW system on or off this section.) the detected vehicle(s) leave the detection zone. Turning the BSWsystemonoroffisdoneusingthe – A vehicle that merges or changes lanes Detection zone [Settings] menu in the vehicle information display. rapidly directly next to your vehicle. For details. see “Vehicle information display” in the• The camera unit may not be able to detect “2. Instruments and controls” section. properly when your vehicle travels beside the Inthe[Settings]menu,selectthe[DriverAssistance] middle section of a vehicle with long wheel- key. Then select [Driving Aids]. Select [Blind Spot base (for example, trailer truck, semi-trailer, Warning] key by pressing . A tick mark tractor). next to [Blind Spot Warning] indicates that the sys- tem is turned on. • Thecameradetectionzoneisdesignedbased SYSTEMON: on a standard lane width. When driving in a wider lane, the camera unit may not detect TheBSWlightonthevehicleinformationdisplaywill vehicles in an adjacent lane. When driving in a SSD1026Z light up. narrow lane, the camera unit may detect ve- SYSTEMOFF: hicles driving two lanes away. The camera unit can detect vehicles on either sideTheBSWlightonthevehicleinformationdisplaywill • The camera unit is designed to ignore most of your vehicle when part of another vehicle is withinturn off. stationary objects, however objects such as the detection zone shown as illustrated. guardrails, walls, foliage and parked vehicles This detection zone typically starts from the outside WARNING may occasionally be detected. This is a nor- mirror of your vehicle and extends approximately 3 mal operating condition. m(10ft)behindtherearbumper,andapproximately • The camera unit may not be able to detect • Thecameraunitmaydetectthereflected im- 3m(10ft)sideways. whencertain objects are present such as: age of vehicles or roadside objects that are The brightness of the Blind Spot Indicator lights is – Pedestrians, bicycles, animals. not actually in the detection zone, especially adjusted automatically depending on the brightness – Vehicles such as motorcycles, low height whentheroadiswet. of the ambient light. vehicles, or high ground clearance A chime sounds if the camera unit has already de- vehicles. tected vehicles when the driver activates the turn – Oncomingvehicles. Starting and driving 5-31

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders