owners manual Seat Leon

all ratings: 0 average rating: 5

leon_EN.book Seite 205 Donnerstag, 15. April 2010 9:19 09 Vehicle maintenance and cleaning205 Steel wheel rims Always use an acid-free detergent for alloy wheel rims. Car polish or other abrasive agents should not be used. If the protective – Clean steel wheel rims regularly using a separate sponge.coating is damaged, e.g. by flying stones, the damaged area should be repaired immediately. Use an industrial cleanser to remove brake dust. Any damage to the paint on steel wheel rims should be repaired before starting to rust.WARNING WARNING • Never wash tyres with a cylindrical jet. Even at large spraying distances and short cleaning times, visible and invisible damage can occur to the • Never wash tyres with a cylindrical jet. Even at large spraying distances tyres. This may cause an accident. and short cleaning times, visible and invisible damage can occur to the • Water, ice and salt on the brakes can reduce braking efficiency. Risk of tyres. This may cause an accident. accident. Directly after washing, avoid sudden and sharp braking. Dry the • Water, ice and salt on the brakes can reduce braking efficiency. Risk of brakes by braking several times ⇒ page191, “Braking effect and braking accident. Directly after washing, avoid sudden and sharp braking. Dry the distance”. brakes by braking several times ⇒page191, “Braking effect and braking distance”. Underbody protection Alloy wheel rims The vehicle underbody is coated to protect it from chemical and mechanical damage. Every two weeks The protective coating can be damaged when driving. We recommend you to – Wash salt and brake dust from alloy wheels. check the protective coating under the body and on the running gear, and – Use an acid free detergent to clean the wheel rims.reinstated if necessary, before and after the winter season. We recommend you to go to your Authorised Service Centre to carry out repair Every three months work and additional anti-corrosion work. – Apply a hard wax compound to the wheels. WARNING Alloy wheels require regular attention to preserve their appearance. If road Do not apply underseal or anti-corrosion coatings to the exhaust pipes, salt and brake dust are not often removed, the aluminium finish will be catalytic converter or the heat shields on the exhaust system. The heat of impaired. the exhaust system or the engine could cause them to ignite! Fire hazard. Safety first Operating instructions Practical tips Technical data

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders