owners manual Chrysler Crossfire

owners manual Chrysler Crossfire - year of production: 2003, 2004, 2005, 2006, 2007 - Chrysler Crossfire owners manual EN

Document: pdf (1.68 MB) 296 pages

all ratings: 0 average rating: 5

text version of content this owner's manual page from owners manual to the vehicle Chrysler Crossfire, year of production 2003 - 2007:

MAINTAINING YOUR VEHICLE 207 EMISSIONS INSPECTIONAND MAINTENANCE 2. Turn the ignition to the ON/RUN position, but do not PROGRAMS crank or start the engine. In some localities, it may be a legal requirement to pass3. If you crank or start the engine, you will have to start an inspection of your vehicle’s emissions control system.this test over. Failure to pass could prevent vehicle registration. For states which have an I/M (Inspection and4. As soon as you turn your key to the ON/RUN Maintenance) requirement, this check verifiesposition, you will see your CHECK ENGINE light come the following: the CHECK ENGINE Light is functioningon as part of a normal bulb check. and is not on when the engine is running, and that the5. Approximately15secondslater,oneoftwothingswill OBD(Onboard Diagnostic) system is ready for testing.happen: Normally, the OBD system will be ready. The OBDa. TheCHECKENGINElightwillflashforabout10 system may not be ready if your vehicle was recentlyseconds and then return to being fully illuminated 7 serviced, if you recently had a dead battery, or a batteryuntil you turn off the ignition key or start the replacement. If the OBD system should be determinedengine. This means that your vehicle’s OBD system not ready for the I/M test, your vehicle may fail the test.is not ready and you should not proceed to the I/M Your vehicle has a simple ignition key actuated teststation. which you can use prior to going to the test station. Tob. The CHECK ENGINE light will not flash at all checkif your vehicle’s OBD system is ready, you must doand will remain fully illuminated until you turn off the following: the ignition key or start the engine. This means that 1. Insert your ignition key into the ignition switch.your vehicle’s OBD system is ready and you can proceed to the I/M station.

Download PDF

Click here to download a pdf file with an instruction manual for Chrysler Crossfire
year of production from: 2003

Do you prefer pdf format?
Find out how to download

Enter the code to download PDF file:

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.