BMW X4 F26 owners manual page 205

text version of content this owner's manual page from owners manual to the vehicle BMW X4 F26, year of production 2014:

Seite 205 Wheels and tires Mobility 7. With the ignition turned on or the engine valve with the available connector on the running, switch on the compressor. sealant container. This prevents leftover sealant from escap‐ ing from the container. 4. Wrap the empty sealant container in suita‐ ble material to avoid dirtying the trunk. 5. Stow the Mobility System back in the vehi‐ cle. Distributing the sealant Immediately drive approx. 5 miles/10 km to en‐ CAUTION sure that the sealant is evenly distributed in the tire. The compressor can overheat during ex‐ tended operation. There is risk of propertyDo not exceed a speed of 50 mph/80 km/h. damage. Do not run the compressor for more If possible, do not drive at speeds less than than 10 min.◀ 12 mph/20 km/h. Let the compressor run for approx. 3 to 8 mi‐ To correct the tire inflation pressure nutes to fill the tire with sealant and achieve a tire inflation pressure of approx. 2.5 bar.1. Stop at a suitable location. While the tire is being filled with sealant, the2.Screw the connection hose of the com‐ tire inflation pressure may sporadically reachpressor directly onto the tire valve stem. approx. 5 bar. Do not switch off the compres‐ 3. Insert the connector into the power socket sor at this point. inside the vehicle. If a tire inflation pressure of 2 bar is not 4. Correct the tire inflation pressure to reached: 2.5 bar. 1. Switch off the compressor. ▷ Increase pressure: with the ignition turned on or the engine running, switch 2. Unscrew the filling hose from the wheel. on the compressor. 3. Drive 33 ft/10 m forward and back to dis‐ ▷ To reduce the pressure: press the but‐ tribute the sealant in the tire. ton on the compressor. 4. Inflate the tire again using the compressor. If a tire inflation pressure of 2 bar cannot be Continuing the trip reached, contact your dealer’s service cen‐ Do not exceed the maximum permissible ter or another qualified service center or speed of 50 mph/80 km/h. repair shop. Reinitialize the Flat Tire Monitor. Stowing the Mobility System Reinitialize the Tire Pressure Monitor. 1. Unscrew the filling hose of the sealant con‐Replace the nonworking tire and the sealant tainer from the wheel. container of the Mobility System as soon as possible. 2. Unscrew the connection hose of the com‐ pressor from the sealant container. 3. Connect the filling hose of the sealant con‐ tainer previously connected to the tire 205 Online Edition for Part no. 01 40 2 964 144 - VI/15

owners manual BMW X4 F26

owners manual BMW X4 F26 - year of production: 2014 - BMW X4 F26 owners manual EN