or
owners manual Seat Mii
owners manual Seat Mii - year of production: 2012 - Seat Mii owners manual EN
Document:
pdf (3.87 MB) 219 pages
all ratings: 0
average rating: 5
text version of content this owner's manual page
from owners manual to the vehicle Seat Mii, year of production 2012:
Technical features
s
Measurement of the urban cycle starts withWheels ● If the tightening torque of the wheel bolts
Urban an engine cold start. City driving is then si-
is too low, they could loosen while the vehi-
ation
cycle mulated at between 0 and 50 km/h (0 and
cle is in motion. Risk of accident! If the tight-
Tyre pressure, snow chains, wheel ific
31 mph).
ening torque is too high, the wheel bolts and
bolts pec
threads can be damaged. s
In the road cycle simulation, the car under-
al
goes frequent acceleration and braking in all
Tyre pressures
Road
hnic
gears, as in normal everyday driving. The
Note
cycle ec
T
road speed ranges from 0 to 120 km/h (0The sticker with the tyre pressure values can
and 75 mph). We recommend that you ask your Technical
be found on the inside of the fuel tank flap.
Service for information about appropriate
The tyre pressure values given there are for
The average combined consumption is calcu-
wheel, tyre and snow chain size.
Com-
cold tyres. The slightly raised pressures of
lated with a weighting of around 37 % for the
bined e
warm tyres must not be reduced. ›››
urban cycle and 63 % for the road cycle.
ic
CO Adv
2
The exhaust gases are collected during bothSnow chains
emis-
driving cycles to calculate carbon dioxide
sions of Snow chains may be fitted only to the front
emissions (urban and road). The gas compo-
the
wheels.
sition is analysed below to evaluate the CO
2
combi-
content and other emissions.
Consult the section “wheels” of this manual.
nation
Wheel bolts
Note
ation
After the wheels have been changed, the
● The kerb weight may vary according to the
tightening torque of the wheel bolts should
vehicle equipment. This could raise consump- Oper
tion and the CO emissions slightly. be checked as soon as possible with a torque
2
wrench ››› . The tightening torque for steel
● In practice, consumption values could be
and alloy wheels is 140 Nm.
different to the values calculated based on
the 715/2007/EC or 80/1268/EEC regula-
WARNING
tions.
● Check the tyre pressure at least once per
ety
month. Checking the tyre pressure is very im-
Saf
portant. If the tyre pressure is too high or too
low, there is an increased danger of accidents
- particularly at high speeds.
199
Download PDF
Click here to download a pdf file with an instruction manual for Seat Mii
year of production from: 2012
Do you prefer pdf format?
Find out how to download
Enter the code to download PDF file:
All pages in one PDF file!
How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.
:
Seat Mii owners manual
pages 198 - 204
Seat Mii owners manual
page 201 / 219
this site is maintained by advertising - for view instructions, turn off ad blocking in your browser
Download PDF